RouterChart.com
RouterChart.com / Routers / Belkin / Belkin N450 DB F9K1105 (2011)
Belkin

Belkin N450 DB F9K1105 (2011) review

The detailed specifications, photos and introductory video of the Belkin N450 DB F9K1105 (F9K1105) N450 router. The list of the competitors most often compared to the Belkin N450 DB F9K1105 router.

The Belkin N450 DB F9K1105 (F9K1105) router released in 2011. It is powered by Broadcom BCM5358UB0 @ 500 MHz chipset, 64 MB RAM and 8 MB flash. The N450 router is compatible with IEEE 802.11a/b/g/n standards, and the maximum speed that you can get with N450 DB F9K1105 is 150 + 300 Mbps.

The Guest network is a useful feature of the N450 DB F9K1105 router that creates a separate network for guests.

The N450 DB F9K1105 router has 1 x 10/100 Mbps WAN and 4 x 10/100 Mbps LAN ports.

Table of contents:

Belkin N450 DB F9K1105 (F9K1105) pictures

Belkin N450 DB F9K1105 / F9K1105 photo Belkin N450 DB F9K1105 / F9K1105 photo
Belkin N450 DB F9K1105 / F9K1105

Belkin N450 DB F9K1105 (F9K1105) specifications

Brand
Belkin
Name
N450 DB F9K1105
Type
F9K1105
Launch
2011

System

The router's memory (RAM) cannot be expanded. By default, the router's flash memory is used to store the Belkin operating system.

Chipset
Broadcom BCM5358UB0 @ 500 MHz
RAM
64 MB
Flash
8 MB
OS
Belkin
Power supply
12 V / 1 A

Network

The latest firmware supports IPv6 protocol that provides an identification and location system for computers on networks and routes traffic across the Internet.

Protocols
IPv4
IPv6
LAN ports
4 x 10/100 Mbps
WAN ports
1 x 10/100 Mbps
Mobile network
no
VPN support
no

Wireless

The N450 DB F9K1105 is compatible with 2.4 GHz Wi-Fi networks. 2.4 GHz is the most widely used frequency and in some cases may be overcrowded. The N450 DB F9K1105 supports the 5 GHz band. The 5 GHz band offers better noise immunity, less interference, and more available channels.

Antennas
internal
2.4 GHz
yes
5 GHz
yes
60 GHz
no
Standards
IEEE 802.11a/b/g/n
Class
N450
Speed
150 + 300 Mbps
Transmit power
20 dBm
Security
WEP
WPA
WPA2
Guest network
yes

Connectivity

USB ports
no
Print server
no
File server
no

Administration

The default IP addresses of the Belkin N450 DB F9K1105 device is 192.168.2.1. These address allows you to access the router's console login page.

Default IP
192.168.2.1
Default username
[blank]
Default password
[blank]

Links

Official site
http://www.belkin.com/

The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Belkin N450 DB F9K1105, then don’t hesite and signal the problem to us.

Belkin N450 DB F9K1105's (F9K1105) comparisons

According to our statistics, the Belkin N450 DB F9K1105 router was most often compared on our site with the following routers.

If there’s information about the Belkin N450 DB F9K1105 that you would like to see on this site, then write to our webmaster@routerchart.com address.

© 2018 RouterChart.com. All rights reserved.
Back to Top