Asus RT-N10E 2.4 GHz router review, is it worth it?
The Asus RT-N10E (RT-N10E) router released in 2012. It is powered by Realtek RTL8196C chipset, 16 MB of RAM and 4 MB of flash. The N150 router is compatible with IEEE 802.11b/g/n standards, and the maximum speed that you can get with RT-N10E is 150 Mbps. The router has 1 x 10/100 Mbps WAN and 4 x 10/100 Mbps LAN ports.
The user-friendly interface of RT-N10E make it accessible to users with varying levels of technical expertise. Asus is a well-established brand and has a significant market presence globally.
Table of contents:
Asus RT-N10E (RT-N10E) specifications
|Dimensions||168 x 124 x 30 mm|
If you plan to move or travel frequently and need to take your router with you, the dimensions become important for portability. Smaller and more compact routers are generally easier to transport, while larger routers with external antennas or multiple ports may be bulkier and less convenient to carry. The weight of router is not typically a critical factor for most home or office setups.
|Power supply||12 V / 0.5 A|
The Realtek RTL8196C CPU provides processing power to handle various tasks and services within the RT-N10E router. The router's memory (16 MB) cannot be expanded. When choosing a router, it is important to consider both the flash memory and RAM specifications. The RT-N10E has 4 MB of flash. A larger flash memory allows for more space to store configuration backups. It enables you to save multiple versions of your router's configuration settings, which can be useful for restoring previous configurations or reverting changes if needed.
Within the RT-N10E router's interface, look for a section related to firmware or system settings. The exact location and wording may vary depending on the router's make and model. The Asus packages the RT-N10E router with 12 V / 0.5 A PSU. A good PSU is an essential component of a computer or electronic device that converts electrical power from an outlet into the appropriate voltage and current required to power the internal components of the device.
|LAN ports||4 x 10/100 Mbps|
|WAN ports||1 x 10/100 Mbps|
The RT-N10E router supports multiple networking standards to ensure compatibility with various devices and systems. The IPv4 uses 32-bit addresses, represented as four sets of numbers separated by periods (e.g. 192.168.0.1). The LAN ports are physical connectors on a RT-N10E router that allow you to connect devices to your local network using Ethernet cables. WAN ports are the entry point to your local network, making them a potential target for unauthorized access or attacks. It's important to secure your WAN connection by using strong passwords, enabling encryption protocols, and keeping the router's firmware up to date to mitigate security risks. The RT-N10E is equipped with Fast Ethernet WAN port, which have a maximum speed of 100 Mbps.
|Antennas||1 x 2 dBi|
|Transmit power||19.5 dBm|
The 1 x 2 dBi, RP-SMA antennas of RT-N10E influence the quality and stability of the Wi-Fi signal. A properly positioned and well-designed antenna can minimize interference and signal degradation, leading to a more reliable and stable connection. The RT-N10E supports the 2.4 GHz Wi-Fi. It is one of the most common frequency bands used for Wi-Fi networks. The RT-N10E is a Wi-Fi 4 router, with slower data transfer speeds. This can result in slower downloads, video buffering, and reduced performance when multiple devices are connected.
The N150 is a performance indicator that represents the router's theoretical maximum speed. The theoretical maximum speed (150 Mbps) represents the highest data transfer rate that the router is capable of achieving under ideal conditions. The TX power of RT-N10E can be adjusted by the user or set automatically by the router firmware. Higher TX power values indicate stronger signal transmission, which can result in a larger coverage area.
The RT-N10E router offers several security protocols: WEP, WPA, WPA2, WPS. The WEP (Wired Equivalent Privacy) was the first security protocol for Wi-Fi networks but is now considered weak and easily compromised. It uses a static encryption key and has known vulnerabilities, so it is no longer recommended for securing Wi-Fi networks. The WPA2 (Wi-Fi Protected Access 2) was introduced as an improvement over WEP and provides stronger security. If WPA3 is not available, WPA2-Personal with AES encryption is still considered secure. The RT-N10E router offers WPS. The WPS (Wi-Fi Protected Setup) provides a simplified and convenient method for connecting devices to a Wi-Fi network. Instead of manually entering the Wi-Fi network name (SSID) and password, users can use the WPS feature to establish a connection with the push of a button or by entering a PIN.
The RT-N10E router doesn't have file-server or print-server functionality.
The default IP address of this router is 192.168.1.1. Explore the router's configuration interface to access more advanced settings such as port forwarding, DHCP settings, parental controls, firewall settings, and QoS (Quality of Service) settings. Regularly changing the password is a good security practice to protect your network and devices from unauthorized access. It is also recommended to use strong, unique passwords for other devices and online accounts connected to your network for enhanced security. By changing the default password, you improve the security of your router and reduce the risk of unauthorized individuals gaining control over your network. It helps prevent unauthorized access to your router's settings, network configurations, and sensitive information.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Asus RT-N10E, then don’t hesite and signal the problem to us.
Asus RT-N10E (RT-N10E) pictures
If there’s information about the Asus RT-N10E that you would like to see on this site, then write to our email@example.com address.