Buffalo AirStation HighPower N300 (2013) review
The Buffalo AirStation HighPower N300 (WHR-300HP2) router released in 2013. It is powered by MediaTek MT7620A @ 580 MHz chipset, 64 MB RAM and 16 MB flash. The N300 router is compatible with IEEE 802.11b/g/n standards, and the maximum speed that you can get with AirStation HighPower N300 is 300 Mbps.
The AirStation HighPower N300 router has 1 x 10/100 Mbps WAN and 4 x 10/100 Mbps LAN ports.
Table of contents:
Buffalo AirStation HighPower N300 (WHR-300HP2) specifications
|Name||AirStation HighPower N300|
|Dimensions||159 x 131 x 55 mm|
The router's memory (RAM) cannot be expanded. By default, the router's flash memory is used to store the Buffalo operating system.
|Chipset||MediaTek MT7620A @ 580 MHz|
|Power supply||12 V / 1 A|
The latest firmware supports IPv6 protocol that provides an identification and location system for computers on networks and routes traffic across the Internet.
|LAN ports||4 x 10/100 Mbps|
|WAN ports||1 x 10/100 Mbps|
The AirStation HighPower N300 is compatible with 2.4 GHz Wi-Fi networks. 2.4 GHz is the most widely used frequency and in some cases may be overcrowded.
|Antennas||2 x 2 dBi|
|Transmit power||20 dBm|
The default IP addresses of the Buffalo AirStation HighPower N300 device is 192.168.11.1. These address allows you to access the router's console login page.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Buffalo AirStation HighPower N300, then don’t hesite and signal the problem to us.
Buffalo AirStation HighPower N300 (WHR-300HP2) pictures
If there’s information about the Buffalo AirStation HighPower N300 that you would like to see on this site, then write to our email@example.com address.