RouterChart.com
D-Link

D-Link AC1750 Smart Mesh WiFi (2019) review

450 + 1300 Mbps
IEEE 802.11a/b/g/n/ac
AC1750
MediaTek MT7621AT @ 880 MHz
256 MB / 128 MB

The D-Link AC1750 Smart Mesh WiFi (DIR-1760) router released in 2019. It is powered by MediaTek MT7621AT @ 880 MHz chipset, 256 MB RAM and 128 MB flash. The AC1750 router is compatible with IEEE 802.11a/b/g/n/ac standards, and the maximum speed that you can get with AC1750 Smart Mesh WiFi is 450 + 1300 Mbps.

The Guest network is a useful feature of the AC1750 Smart Mesh WiFi router that creates a separate network for guests. It has 1 x USB 3.0 port(s).

The AC1750 Smart Mesh WiFi router has 1 x 10/100/1000 Mbps WAN and 4 x 10/100/1000 Mbps LAN ports.

Table of contents:

D-Link AC1750 Smart Mesh WiFi (DIR-1760) specifications

BrandD-Link
NameAC1750 Smart Mesh WiFi
TypeDIR-1760
Rating
Rated 3/5 based on 693 user votes.
Launch2019

Body

Dimensions223 x 177 x 65 mm
Weight590 g

System

The router's memory (RAM) cannot be expanded. By default, the router's flash memory is used to store the D-Link operating system.

ChipsetMediaTek MT7621AT @ 880 MHz
RAM256 MB
Flash128 MB
OSD-Link
Power supply12 V / 2 A

Network

The latest firmware supports IPv6 protocol that provides an identification and location system for computers on networks and routes traffic across the Internet.

ProtocolsIPv4
IPv6
LAN ports4 x 10/100/1000 Mbps
WAN ports1 x 10/100/1000 Mbps
Mobile networkno
VPN supportQuickVPN

Wireless

The AC1750 Smart Mesh WiFi is compatible with 2.4 GHz Wi-Fi networks. 2.4 GHz is the most widely used frequency and in some cases may be overcrowded. The AC1750 Smart Mesh WiFi supports the 5 GHz band. The 5 GHz band offers better noise immunity, less interference, and more available channels.

Antennas4 x 5 dBi
fixed
2.4 GHzyes
5 GHzyes
6 GHzno
60 GHzno
StandardsIEEE 802.11a/b/g/n/ac
ClassAC1750
Speed450 + 1300 Mbps
Transmit power24 dBm
SecurityWPA
WPA2
WPS
Guest networkyes

Connectivity

The USB 3.0 ports provide a fast interface for external storage with data transfer rates of up to 4.8 Gbps. You can attach a compatible USB printer to the D-Link AC1750 Smart Mesh WiFi device. It has built-in NAS functionality.

USB ports1 x USB 3.0
Print serveryes
File serveryes

Administration

The default IP addresses of the D-Link AC1750 Smart Mesh WiFi device is 192.168.0.1. These address allows you to access the router's console login page.

Default IP192.168.0.1
Default username[blank]
Default password[blank]

The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the D-Link AC1750 Smart Mesh WiFi, then don’t hesite and signal the problem to us.

D-Link AC1750 Smart Mesh WiFi (DIR-1760) pictures

D-Link AC1750 Smart Mesh WiFi / DIR-1760 photo D-Link AC1750 Smart Mesh WiFi / DIR-1760 photo D-Link AC1750 Smart Mesh WiFi / DIR-1760 photo D-Link AC1750 Smart Mesh WiFi / DIR-1760 photo
D-Link AC1750 Smart Mesh WiFi / DIR-1760

If there’s information about the D-Link AC1750 Smart Mesh WiFi that you would like to see on this site, then write to our webmaster@routerchart.com address.

RouterChart.com / Routers / D-Link / D-Link AC1750 Smart Mesh WiFi (2019)
© 2023 RouterChart.com. All rights reserved.
Back to Top