D-Link AC1900 MU-MIMO Wi-Fi router: Pros and Cons

D-Link AC1900 MU-MIMO Wi-Fi (DIR-1950) pictures

The specifications below are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the D-Link AC1900 MU-MIMO Wi-Fi, then don’t hesite and signal the problem to us.

D-Link AC1900 MU-MIMO Wi-Fi (DIR-1950) specifications

Body

If you plan to move or travel frequently and need to take your router with you, the dimensions become important for portability. Smaller and more compact routers are generally easier to transport, while larger routers with external antennas or multiple ports may be bulkier and less convenient to carry. If you purchase a router online or have it shipped, the weight may affect the overall cost. Heavier routers can result in higher shipping charges, especially for international deliveries.

System

The MediaTek MT7531BE @ 1.2 GHz CPU provides processing power to handle various tasks and services within the AC1900 MU-MIMO Wi-Fi router. The AC1900 MU-MIMO Wi-Fi has 128 MB of RAM. Some advanced router features and software functionalities require a certain amount of RAM to operate properly. For example, routers with more RAM can support advanced security features, VPN services, or QoS (Quality of Service) prioritization more effectively.

The AC1900 MU-MIMO Wi-Fi has 128 MB of flash memory. A larger flash memory allows for more storage space to accommodate future firmware upgrades. The process of upgrading the firmware on routers has become relatively simple and user-friendly over the years. The D-Link provides easy-to-use interfaces and instructions to guide users through the firmware upgrade process. The D-Link packages the AC1900 MU-MIMO Wi-Fi router with 12 V / 1.5 A PSU. A good PSU is an essential component of a computer or electronic device that converts electrical power from an outlet into the appropriate voltage and current required to power the internal components of the device.

Network

The AC1900 MU-MIMO Wi-Fi router offers built-in security features to protect your network and connected devices. The IPv4 uses 32-bit addresses, represented as four sets of numbers separated by periods (e.g. 192.168.0.1). The AC1900 MU-MIMO Wi-Fi router also supports IPv6 protocol, allowing you to utilize the latest version of the Internet Protocol. The LAN ports are physical connectors on a AC1900 MU-MIMO Wi-Fi router that allow you to connect devices to your local network using Ethernet cables.

This router has Gigabit Ethernet LAN ports. If you have a high-speed internet plan that offers speeds of 1 Gbps or higher, gigabit Ethernet ports are essential to fully utilize the available bandwidth. WAN ports often require specific configuration settings based on the type of internet connection provided by your ISP. The AC1900 MU-MIMO Wi-Fi router supports Gigabit speed on its WAN port, that can support speeds up to 1000 Mbps. This router ensures that you can fully utilize high-speed internet connections provided by your ISP.

Wireless

The 4 x 4 dBi, fixed antennas of AC1900 MU-MIMO Wi-Fi influence the quality and stability of the Wi-Fi signal. A properly positioned and well-designed antenna can minimize interference and signal degradation, leading to a more reliable and stable connection. This router is 2.4 GHz compatible. The 2.4 GHz band is widely supported by a wide range of devices, including older devices that may not be compatible with the 5 GHz band.

The AC1900 MU-MIMO Wi-Fi supports 5 GHz signals. Most modern devices, such as smartphones, tablets, laptops, and smart TVs, support dual-band Wi-Fi, which means they can connect to both 2.4 GHz and 5 GHz networks. By utilizing the 5 GHz band, you can offload some devices from the crowded 2.4 GHz band, reducing congestion and improving overall network performance. The AC1900 MU-MIMO Wi-Fi AC Wi-Fi router is backward compatible with older Wi-Fi devices that support 802.11a/b/g/n standards.

The AC1900 refers to the maximum combined data transfer rate supported by the router across all Wi-Fi bands. The AC1900 MU-MIMO Wi-Fi is capable of a maximum throughput speed of 600 + 1300 Mbps. The real-world speed of a AC1900 MU-MIMO Wi-Fi router is typically lower than its theoretical maximum speed. The TX power of AC1900 MU-MIMO Wi-Fi can be adjusted by the user or set automatically by the router firmware. Higher TX power values indicate stronger signal transmission, which can result in a larger coverage area.

The AC1900 MU-MIMO Wi-Fi router offers several security protocols: WPA, WPA2, WPS. The WPA2 (Wi-Fi Protected Access 2) was introduced as an improvement over WEP and provides stronger security. If WPA3 is not available, WPA2-Personal with AES encryption is still considered secure. The AC1900 MU-MIMO Wi-Fi router offers WPS. The WPS (Wi-Fi Protected Setup) provides a simplified and convenient method for connecting devices to a Wi-Fi network. Instead of manually entering the Wi-Fi network name (SSID) and password, users can use the WPS feature to establish a connection with the push of a button or by entering a PIN. The D-Link AC1900 MU-MIMO Wi-Fi router is capable of creating a guest network. Guests connected to the guest network usually have limited access to network settings and configurations. They are typically restricted from accessing devices connected to the primary network, such as printers, network-attached storage (NAS), or other shared resources.

Connectivity

The AC1900 MU-MIMO Wi-Fi router doesn't have file-server or print-server functionality.

Administration

The default IP address of this router is 192.168.0.1. Explore the router's configuration interface to access more advanced settings such as port forwarding, DHCP settings, parental controls, firewall settings, and QoS (Quality of Service) settings. If you are unable to log in to the setup panel of your D-Link router, performing a reset can be a helpful troubleshooting step. It is highly recommended to change the default password of your AC1900 MU-MIMO Wi-Fi router after the initial setup. If you forget the new password in the future, you may need to perform a factory reset on the router to revert to the default settings.

D-Link AC1900 MU-MIMO Wi-Fi (DIR-1950) comparisons

According to our statistics, the D-Link AC1900 MU-MIMO Wi-Fi router was most often compared on our site with the following routers.

D-Link DIR-636L D-Link D-Fend AC2600 Wi-Fi D-Link DIR-605L D-Link Wireless N300 DWR-116 D-Link Wireless AC1750 D-Link DIR-518L D-Link DIR-860L D-Link DIR-878

If there’s information about the D-Link AC1900 MU-MIMO Wi-Fi that you would like to see on this site, then write to us.