D-Link DIR-605L 2.4 GHz router review, is it worth it?

The D-Link DIR-605L (DIR-605L) router released in 2011. It is powered by Realtek RTL8196C @ 400 MHz chipset, 32 MB of RAM and 4 MB of flash. The N300 router is compatible with IEEE 802.11b/g/n standards, and the maximum speed that you can get with DIR-605L is 300 Mbps. The router has 1 x 10/100 Mbps WAN and 4 x 10/100 Mbps LAN ports.

If you require more advanced features, faster speeds, or support for the latest wireless standards, you may want to consider higher-end routers in the D-Link product lineup or other routers available on the market. D-Link typically provides warranties for their products, offering peace of mind and protection against manufacturing defects.

Table of contents:

• D-Link DIR-605L specifications
• D-Link DIR-605L pictures

D-Link DIR-605L (DIR-605L) specifications

Body

If you plan to move or travel frequently and need to take your router with you, the dimensions become important for portability. Smaller and more compact routers are generally easier to transport, while larger routers with external antennas or multiple ports may be bulkier and less convenient to carry. If you purchase a router online or have it shipped, the weight may affect the overall cost. Heavier routers can result in higher shipping charges, especially for international deliveries.

System

The Realtek RTL8196C @ 400 MHz CPU provides processing power to handle various tasks and services within the DIR-605L router. The DIR-605L has 32 MB of RAM. Some advanced router features and software functionalities require a certain amount of RAM to operate properly. For example, routers with more RAM can support advanced security features, VPN services, or QoS (Quality of Service) prioritization more effectively.

The DIR-605L has 4 MB of flash memory. A larger flash memory allows for more storage space to accommodate future firmware upgrades. The process of upgrading the firmware on routers has become relatively simple and user-friendly over the years. The D-Link provides easy-to-use interfaces and instructions to guide users through the firmware upgrade process. The D-Link packages the DIR-605L router with 5 V / 1 A PSU. A good PSU is an essential component of a computer or electronic device that converts electrical power from an outlet into the appropriate voltage and current required to power the internal components of the device.

Network

The DIR-605L router offers built-in security features to protect your network and connected devices. The IPv4 uses 32-bit addresses, represented as four sets of numbers separated by periods (e.g. 192.168.0.1). The LAN ports are physical connectors on a DIR-605L router that allow you to connect devices to your local network using Ethernet cables. WAN ports often require specific configuration settings based on the type of internet connection provided by your ISP. The DIR-605L is equipped with Fast Ethernet WAN port, which have a maximum speed of 100 Mbps.

Wireless

The 2 x 5 dBi, fixed antennas of DIR-605L influence the quality and stability of the Wi-Fi signal. A properly positioned and well-designed antenna can minimize interference and signal degradation, leading to a more reliable and stable connection. The DIR-605L supports the 2.4 GHz Wi-Fi. It is one of the most common frequency bands used for Wi-Fi networks. The DIR-605L is a Wi-Fi 4 router, with slower data transfer speeds. This can result in slower downloads, video buffering, and reduced performance when multiple devices are connected.

The N300 refers to the maximum combined data transfer rate supported by the router across all Wi-Fi bands. The DIR-605L is capable of a maximum throughput speed of 300 Mbps. The real-world speed of a DIR-605L router is typically lower than its theoretical maximum speed. The TX power of DIR-605L can be adjusted by the user or set automatically by the router firmware. Higher TX power values indicate stronger signal transmission, which can result in a larger coverage area.

The DIR-605L router offers several security protocols: WPA, WPA2, WPS. The WPA2 (Wi-Fi Protected Access 2) was introduced as an improvement over WEP and provides stronger security. If WPA3 is not available, WPA2-Personal with AES encryption is still considered secure. The DIR-605L router offers WPS. The WPS (Wi-Fi Protected Setup) provides a simplified and convenient method for connecting devices to a Wi-Fi network. Instead of manually entering the Wi-Fi network name (SSID) and password, users can use the WPS feature to establish a connection with the push of a button or by entering a PIN.

Connectivity

The DIR-605L router doesn't have file-server or print-server functionality.

Administration

The default IP address of this router is 192.168.0.1. Explore the router's configuration interface to access more advanced settings such as port forwarding, DHCP settings, parental controls, firewall settings, and QoS (Quality of Service) settings. If you are unable to log in to the setup panel of your D-Link router, performing a reset can be a helpful troubleshooting step. It is highly recommended to change the default password of your DIR-605L router after the initial setup. If you forget the new password in the future, you may need to perform a factory reset on the router to revert to the default settings.

The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the D-Link DIR-605L, then don’t hesite and signal the problem to us.

D-Link DIR-605L (DIR-605L) pictures

If there’s information about the D-Link DIR-605L that you would like to see on this site, then write to our webmaster@routerchart.com address.