RouterChart.com
D-Link

D-Link DIR-882 (2017) review

800 + 1733 Mbps
IEEE 802.11a/b/g/n/ac
AC2600
Broadcom BCM4709C0 @ 1.4 GHz
256 MB / 128 MB

The D-Link DIR-882 (DIR-882) router released in 2017. It is powered by Broadcom BCM4709C0 @ 1.4 GHz chipset, 256 MB RAM and 128 MB flash. The AC2600 router is compatible with IEEE 802.11a/b/g/n/ac standards, and the maximum speed that you can get with DIR-882 is 800 + 1733 Mbps.

The Guest network is a useful feature of the DIR-882 router that creates a separate network for guests. It has 1 x USB 2.0, 1 x USB 3.0 port(s).

The DIR-882 router has 1 x 10/100/1000 Mbps WAN and 4 x 10/100/1000 Mbps LAN ports.

Table of contents:

D-Link DIR-882 (DIR-882) specifications

BrandD-Link
NameDIR-882
TypeDIR-882
Rating
Rated 4/5 based on 1083 user votes.
Launch2017

Body

Dimensions254 x 177.8 x 44.5 mm

System

The router's memory (RAM) cannot be expanded. By default, the router's flash memory is used to store the D-Link operating system.

ChipsetBroadcom BCM4709C0 @ 1.4 GHz
RAM256 MB
Flash128 MB
OSD-Link
Power supply12 V / 2.5 A

Network

The latest firmware supports IPv6 protocol that provides an identification and location system for computers on networks and routes traffic across the Internet.

ProtocolsIPv4
IPv6
LAN ports4 x 10/100/1000 Mbps
WAN ports1 x 10/100/1000 Mbps
Mobile networkno
VPN supportL2TP/IPSec

Wireless

The DIR-882 is compatible with 2.4 GHz Wi-Fi networks. 2.4 GHz is the most widely used frequency and in some cases may be overcrowded. The DIR-882 supports the 5 GHz band. The 5 GHz band offers better noise immunity, less interference, and more available channels.

Antennas4 x 2 dBi
fixed
2.4 GHzyes
5 GHzyes
60 GHzno
StandardsIEEE 802.11a/b/g/n/ac
ClassAC2600
Speed800 + 1733 Mbps
Transmit power20 dBm
SecurityWPA
WPA2
WPS
Guest networkyes

Connectivity

The USB 3.0 ports provide a fast interface for external storage with data transfer rates of up to 4.8 Gbps. You can attach a compatible USB printer to the D-Link DIR-882 device. It has built-in NAS functionality.

USB ports1 x USB 2.0
1 x USB 3.0
Print serveryes
File serveryes

Administration

The default IP addresses of the D-Link DIR-882 device is 192.168.0.1. These address allows you to access the router's console login page.

Default IP192.168.0.1
Default usernameAdmin
Default password[blank]

The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the D-Link DIR-882, then don’t hesite and signal the problem to us.

D-Link DIR-882 (DIR-882) pictures

D-Link DIR-882 / DIR-882 photo D-Link DIR-882 / DIR-882 photo D-Link DIR-882 / DIR-882 photo D-Link DIR-882 / DIR-882 photo
D-Link DIR-882 / DIR-882

If there’s information about the D-Link DIR-882 that you would like to see on this site, then write to our webmaster@routerchart.com address.

RouterChart.com / Routers / D-Link / D-Link DIR-882 (2017)
© 2023 RouterChart.com. All rights reserved.
Back to Top