RouterChart.com
D-Link

D-Link EXO AC1900 Smart Mesh Wi-Fi (2019) review

600 + 1300 Mbps
IEEE 802.11a/b/g/n/ac
AC1900
MediaTek MT7621AT @ 880 MHz
256 MB / 128 MB

The D-Link EXO AC1900 Smart Mesh Wi-Fi (DIR-1960) router released in 2019. It is powered by MediaTek MT7621AT @ 880 MHz chipset, 256 MB RAM and 128 MB flash. The AC1900 router is compatible with IEEE 802.11a/b/g/n/ac standards, and the maximum speed that you can get with EXO AC1900 Smart Mesh Wi-Fi is 600 + 1300 Mbps.

The Guest network is a useful feature of the EXO AC1900 Smart Mesh Wi-Fi router that creates a separate network for guests. It has 1 x USB 3.0 port(s).

The EXO AC1900 Smart Mesh Wi-Fi router has 1 x 10/100/1000 Mbps WAN and 4 x 10/100/1000 Mbps LAN ports.

Table of contents:

D-Link EXO AC1900 Smart Mesh Wi-Fi (DIR-1960) specifications

BrandD-Link
NameEXO AC1900 Smart Mesh Wi-Fi
TypeDIR-1960
Rating
Rated 4/5 based on 695 user votes.
Launch2019

Body

Dimensions223 x 177 x 65 mm
Weight593 g

System

The router's memory (RAM) cannot be expanded. By default, the router's flash memory is used to store the D-Link operating system.

ChipsetMediaTek MT7621AT @ 880 MHz
RAM256 MB
Flash128 MB
OSD-Link
Power supply12 V / 2 A

Network

The latest firmware supports IPv6 protocol that provides an identification and location system for computers on networks and routes traffic across the Internet.

ProtocolsIPv4
IPv6
LAN ports4 x 10/100/1000 Mbps
WAN ports1 x 10/100/1000 Mbps
Mobile networkno
VPN supportQuickVPN

Wireless

The EXO AC1900 Smart Mesh Wi-Fi is compatible with 2.4 GHz Wi-Fi networks. 2.4 GHz is the most widely used frequency and in some cases may be overcrowded. The EXO AC1900 Smart Mesh Wi-Fi supports the 5 GHz band. The 5 GHz band offers better noise immunity, less interference, and more available channels.

Antennas4 x 5 dBi
fixed
2.4 GHzyes
5 GHzyes
6 GHzno
60 GHzno
StandardsIEEE 802.11a/b/g/n/ac
ClassAC1900
Speed600 + 1300 Mbps
Transmit power29 dBm
SecurityWPA
WPA2
WPS
Guest networkyes

Connectivity

The USB 3.0 ports provide a fast interface for external storage with data transfer rates of up to 4.8 Gbps. You can attach a compatible USB printer to the D-Link EXO AC1900 Smart Mesh Wi-Fi device. It has built-in NAS functionality.

USB ports1 x USB 3.0
Print serveryes
File serveryes

Administration

The default IP addresses of the D-Link EXO AC1900 Smart Mesh Wi-Fi device is 192.168.0.1. These address allows you to access the router's console login page.

Default IP192.168.0.1
Default username[blank]
Default password[blank]

The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the D-Link EXO AC1900 Smart Mesh Wi-Fi, then don’t hesite and signal the problem to us.

D-Link EXO AC1900 Smart Mesh Wi-Fi (DIR-1960) pictures

D-Link EXO AC1900 Smart Mesh Wi-Fi / DIR-1960 photo D-Link EXO AC1900 Smart Mesh Wi-Fi / DIR-1960 photo D-Link EXO AC1900 Smart Mesh Wi-Fi / DIR-1960 photo D-Link EXO AC1900 Smart Mesh Wi-Fi / DIR-1960 photo
D-Link EXO AC1900 Smart Mesh Wi-Fi / DIR-1960

If there’s information about the D-Link EXO AC1900 Smart Mesh Wi-Fi that you would like to see on this site, then write to our webmaster@routerchart.com address.

RouterChart.com / Routers / D-Link / D-Link EXO AC1900 Smart Mesh Wi-Fi (2019)
© 2023 RouterChart.com. All rights reserved.
Back to Top