Edimax BR-6228nS WiFi router: Pros and Cons

Edimax BR-6228nS (BR-6228nS) pictures

The specifications below are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Edimax BR-6228nS, then don’t hesite and signal the problem to us.

Edimax BR-6228nS (BR-6228nS) specifications

Body

If you plan to move or travel frequently and need to take your router with you, the dimensions become important for portability. Smaller and more compact routers are generally easier to transport, while larger routers with external antennas or multiple ports may be bulkier and less convenient to carry.

System

The Realtek RTL8196C @ 390 MHz CPU provides processing power to handle various tasks and services within the BR-6228nS router. The BR-6228nS comes with 16 MB of RAM. The amount of RAM in a router can impact its performance and capacity to handle concurrent operations and traffic. Higher RAM capacity allows for better multitasking, larger routing tables, and improved overall performance. The 4 MB flash memory in the router serves as the storage medium for the router's firmware. It is a non-volatile memory that retains its data even when power is removed from the device.

The Edimax often releases firmware updates to enhance the router's functionality, improve security, fix bugs, and add new features. Firmware updates can provide performance improvements, compatibility with new devices or protocols, and address vulnerabilities. The Edimax packages the BR-6228nS router with 5 V / 1 A PSU. A good PSU is an essential component of a computer or electronic device that converts electrical power from an outlet into the appropriate voltage and current required to power the internal components of the device.

Network

Like many modern routers, the BR-6228nS supports many network standards too. The IPv4 uses 32-bit addresses, represented as four sets of numbers separated by periods (e.g. 192.168.0.1). The LAN ports are physical connectors on a BR-6228nS router that allow you to connect devices to your local network using Ethernet cables. The WAN port on a router stands for "Wide Area Network" port. It is used to connect the router to the external network, typically provided by an internet service provider (ISP). The BR-6228nS is equipped with Fast Ethernet WAN port, which have a maximum speed of 100 Mbps.

Wireless

The 1 x 3 dBi antennas of BR-6228nS influence the quality and stability of the Wi-Fi signal. A properly positioned and well-designed antenna can minimize interference and signal degradation, leading to a more reliable and stable connection. The BR-6228nS is compatible with 2.4 GHz Wi-Fi. Many IoT (Internet of Things) devices, smart home devices, and older Wi-Fi-enabled devices primarily operate on the 2.4 GHz band.

The BR-6228nS is a Wi-Fi 4 router, with slower data transfer speeds. This can result in slower downloads, video buffering, and reduced performance when multiple devices are connected. The N150 refers to the maximum combined data transfer rate supported by the router across all Wi-Fi bands. The BR-6228nS is capable of a maximum throughput speed of 150 Mbps. The real-world speed of a BR-6228nS router is typically lower than its theoretical maximum speed.

The TX power of BR-6228nS can be adjusted by the user or set automatically by the router firmware. Higher TX power values indicate stronger signal transmission, which can result in a larger coverage area. The BR-6228nS router offers several security protocols: WEP, WPA, WPA2, WPS. The WEP (Wired Equivalent Privacy) was the first security protocol for Wi-Fi networks but is now considered weak and easily compromised. It uses a static encryption key and has known vulnerabilities, so it is no longer recommended for securing Wi-Fi networks.

The WPA2 (Wi-Fi Protected Access 2) was introduced as an improvement over WEP and provides stronger security. If WPA3 is not available, WPA2-Personal with AES encryption is still considered secure. The BR-6228nS router offers WPS. The WPS (Wi-Fi Protected Setup) provides a simplified and convenient method for connecting devices to a Wi-Fi network. Instead of manually entering the Wi-Fi network name (SSID) and password, users can use the WPS feature to establish a connection with the push of a button or by entering a PIN.

Connectivity

The BR-6228nS router doesn't have file-server or print-server functionality.

Administration

The default IP address of this router is 192.168.2.1. Explore the router's configuration interface to access more advanced settings such as port forwarding, DHCP settings, parental controls, firewall settings, and QoS (Quality of Service) settings. If you are unable to log in to the setup panel of your Edimax router, performing a reset can be a helpful troubleshooting step. It is highly recommended to change the default password of your BR-6228nS router after the initial setup. If you forget the new password in the future, you may need to perform a factory reset on the router to revert to the default settings.

Edimax BR-6228nS (BR-6228nS) comparisons

According to our statistics, the Edimax BR-6228nS router was most often compared on our site with the following routers.

Edimax BR-6475nD Edimax BR-6428nS v4 Edimax BR-6675nD Edimax BR-6208AC Edimax BR-6478AC Edimax BR-6288ACL Edimax BR-6478AC v2 Edimax BR-6574n

If there’s information about the Edimax BR-6228nS that you would like to see on this site, then write to us.