Linksys WRT100 WiFi router: Pros and Cons

54 Mbps

IEEE 802.11b/g

Ralink RT2780 @ 266 MHz

16 MB / 4 MB

The Linksys WRT100 (WRT100) router released in 2007. It is powered by Ralink RT2780 @ 266 MHz chipset, 16 MB of RAM and 4 MB of flash. The G54 router is compatible with IEEE 802.11b/g standards, and the maximum speed that you can get with WRT100 is 54 Mbps. The router has 1 x 10/100 Mbps WAN and 4 x 10/100 Mbps LAN ports.

The WRT100 is an affordable and reliable router designed for basic networking needs. Linksys typically provides warranties for their products, offering peace of mind and protection against manufacturing defects.

Linksys WRT100 (WRT100) pictures

The specifications below are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Linksys WRT100, then don’t hesite and signal the problem to us.

Linksys WRT100 (WRT100) specifications

Brand	Linksys
Name	WRT100
Type	WRT100
Rating	★★★★★ Rated 3/5 based on 1246 user votes.
Launch	2007

Body

Dimensions	148 x 36 x 170 mm
Weight	334 g

The dimensions and design of a router can impact its cooling capabilities. Routers with larger dimensions may have more space for internal cooling mechanisms, such as larger fans or heat sinks, which can help dissipate heat more effectively. If you purchase a router online or have it shipped, the weight may affect the overall cost. Heavier routers can result in higher shipping charges, especially for international deliveries.

System

Chipset	Ralink RT2780 @ 266 MHz
RAM	16 MB
Flash	4 MB
OS	Linksys
Power supply	12 V / 1 A

The Linksys WRT100 router is equipped with Ralink RT2780 @ 266 MHz processor. The WRT100 has 16 MB of RAM. Some advanced router features and software functionalities require a certain amount of RAM to operate properly. For example, routers with more RAM can support advanced security features, VPN services, or QoS (Quality of Service) prioritization more effectively. The WRT100 has 4 MB of flash memory. A larger flash memory allows for more storage space to accommodate future firmware upgrades.

The process of upgrading the firmware on routers has become relatively simple and user-friendly over the years. The Linksys provides easy-to-use interfaces and instructions to guide users through the firmware upgrade process. The Linksys WRT100 router comes with 12 V / 1 A PSU. This unit is responsible for providing electrical power to the router, and if it becomes faulty, it can be replaced with a new, compatible one.

Network

Protocols	IPv4
LAN ports	4 x 10/100 Mbps
WAN ports	1 x 10/100 Mbps
Mobile network	no
VPN support	no

The WRT100 router offers built-in security features to protect your network and connected devices. The IPv4 is the fourth iteration of the Internet Protocol (IP) and is the most widely used version of IP on the internet today. The Linksys WRT100 has 4 x 10/100 Mbps LAN and 1 x 10/100 Mbps WAN ports. LAN or Ethernet ports (RJ-45) are used to connect devices to the local area network (LAN). WAN ports often require specific configuration settings based on the type of internet connection provided by your ISP. The WAN port on the WRT100 router is a Fast Ethernet port, not a Gigabit Ethernet. The Fast Ethernet ports are capable of supporting speeds up to 100 Mbps, which is still suitable for most internet connections.

Wireless

Antennas	1 x 1.8 dBi
2.4 GHz	yes
5 GHz	no
60 GHz	no
Standards	IEEE 802.11b/g
Class	G54
Speed	54 Mbps
Transmit power	16.5 dBm
Security	WEP WPA WPA2
Guest network	no

This router has 1 x 1.8 dBi antennas. Antennas play a significant role in Wi-Fi performance and coverage. They are essential components of wireless routers that transmit and receive radio signals to establish wireless connections with devices. The WRT100 supports the 2.4 GHz Wi-Fi. It is one of the most common frequency bands used for Wi-Fi networks. 802.11g routers have a maximum data transfer rate of 54 Mbps, which is significantly slower compared to more modern Wi-Fi standards.

The G54 refers to the maximum combined data transfer rate supported by the router across all Wi-Fi bands. The WRT100 is capable of a maximum throughput speed of 54 Mbps. The real-world speed of a WRT100 router is typically lower than its theoretical maximum speed. The TX power (16.5 dBm) of a router refers to the transmission power or signal strength at which the router broadcasts its Wi-Fi signal. It determines the range and coverage area of the wireless network.

The WRT100 router offers several security protocols: WEP, WPA, WPA2. The WEP (Wired Equivalent Privacy) was the first security protocol for Wi-Fi networks but is now considered weak and easily compromised. It uses a static encryption key and has known vulnerabilities, so it is no longer recommended for securing Wi-Fi networks. The WPA2 (Wi-Fi Protected Access 2) was introduced as an improvement over WEP and provides stronger security. If WPA3 is not available, WPA2-Personal with AES encryption is still considered secure.

Connectivity

USB ports	no
Print server	no
File server	no

The WRT100 router doesn't have file-server or print-server functionality.

Administration

Default IP	192.168.1.1
Default username	[blank]
Default password	admin

The default IP addresses of the Linksys WRT100 device is 192.168.1.1. These address allows you to access the router's console login page. If you are unable to log in to the setup panel of your Linksys router, performing a reset can be a helpful troubleshooting step. It is highly recommended to change the default password of your WRT100 router after the initial setup. If you forget the new password in the future, you may need to perform a factory reset on the router to revert to the default settings.