Linksys WRT110 2.4 GHz router review, is it worth it?

The Linksys WRT110 (WRT110) router released in 2008. It is powered by Ralink RT2780 @ 266 MHz chipset, 16 MB of RAM and 4 MB of flash. The N150 router is compatible with IEEE 802.11b/g/n standards, and the maximum speed that you can get with WRT110 is 150 Mbps. The router has 1 x 10/100 Mbps WAN and 4 x 10/100 Mbps LAN ports.

If you require more advanced features, faster speeds, or support for the latest wireless standards, you may want to consider higher-end routers in the Linksys product lineup or other routers available on the market. Linksys has been involved in the development of innovative networking solutions.

Table of contents:

• Linksys WRT110 specifications
• Linksys WRT110 pictures

Linksys WRT110 (WRT110) specifications

Body

If you plan to move or travel frequently and need to take your router with you, the dimensions become important for portability. Smaller and more compact routers are generally easier to transport, while larger routers with external antennas or multiple ports may be bulkier and less convenient to carry. The weight of a router can be a consideration in certain situations, but it is generally not as crucial as other factors such as performance, features, and compatibility.

System

The Ralink RT2780 @ 266 MHz CPU provides processing power to handle various tasks and services within the WRT110 router. The WRT110 comes with 16 MB of RAM. The amount of RAM in a router can impact its performance and capacity to handle concurrent operations and traffic. Higher RAM capacity allows for better multitasking, larger routing tables, and improved overall performance. The 4 MB flash memory in the router serves as the storage medium for the router's firmware. It is a non-volatile memory that retains its data even when power is removed from the device.

The Linksys often releases firmware updates to enhance the router's functionality, improve security, fix bugs, and add new features. Firmware updates can provide performance improvements, compatibility with new devices or protocols, and address vulnerabilities. The Linksys packages the WRT110 router with 12 V / 1 A PSU. A good PSU is an essential component of a computer or electronic device that converts electrical power from an outlet into the appropriate voltage and current required to power the internal components of the device.

Network

Like many modern routers, the WRT110 supports many network standards too. The IPv4 uses 32-bit addresses, represented as four sets of numbers separated by periods (e.g. 192.168.0.1). The LAN ports are physical connectors on a WRT110 router that allow you to connect devices to your local network using Ethernet cables. The WAN port on a router stands for "Wide Area Network" port. It is used to connect the router to the external network, typically provided by an internet service provider (ISP). The WRT110 is equipped with Fast Ethernet WAN port, which have a maximum speed of 100 Mbps.

Wireless

The 2 x 1.8 dBi, internal antennas of WRT110 influence the quality and stability of the Wi-Fi signal. A properly positioned and well-designed antenna can minimize interference and signal degradation, leading to a more reliable and stable connection. The WRT110 supports the 2.4 GHz Wi-Fi. It is one of the most common frequency bands used for Wi-Fi networks. The WRT110 is a Wi-Fi 4 router, with slower data transfer speeds. This can result in slower downloads, video buffering, and reduced performance when multiple devices are connected.

The N150 refers to the maximum combined data transfer rate supported by the router across all Wi-Fi bands. The WRT110 is capable of a maximum throughput speed of 150 Mbps. The real-world speed of a WRT110 router is typically lower than its theoretical maximum speed. The TX power of WRT110 can be adjusted by the user or set automatically by the router firmware. Higher TX power values indicate stronger signal transmission, which can result in a larger coverage area.

The WRT110 router offers several security protocols: WEP, WPA, WPA2. The WEP (Wired Equivalent Privacy) was the first security protocol for Wi-Fi networks but is now considered weak and easily compromised. It uses a static encryption key and has known vulnerabilities, so it is no longer recommended for securing Wi-Fi networks. The WPA2 (Wi-Fi Protected Access 2) was introduced as an improvement over WEP and provides stronger security. If WPA3 is not available, WPA2-Personal with AES encryption is still considered secure.

Connectivity

The WRT110 router doesn't have file-server or print-server functionality.

Administration

The default IP address of this router is 192.168.1.1. Explore the router's configuration interface to access more advanced settings such as port forwarding, DHCP settings, parental controls, firewall settings, and QoS (Quality of Service) settings. If you are unable to log in to the setup panel of your Linksys router, performing a reset can be a helpful troubleshooting step. It is highly recommended to change the default password of your WRT110 router after the initial setup. If you forget the new password in the future, you may need to perform a factory reset on the router to revert to the default settings.

The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Linksys WRT110, then don’t hesite and signal the problem to us.

Linksys WRT110 (WRT110) pictures

If there’s information about the Linksys WRT110 that you would like to see on this site, then write to our webmaster@routerchart.com address.