Linksys WRT54GP2 WiFi router: Pros and Cons

54 Mbps

IEEE 802.11b/g

Marvell 88W8510

32 MB / 8 MB

The Linksys WRT54GP2 (WRT54GP2) router released in 2004. It is powered by Marvell 88W8510 chipset, 32 MB of RAM and 8 MB of flash. The G54 router is compatible with IEEE 802.11b/g standards, and the maximum speed that you can get with WRT54GP2 is 54 Mbps. The router has 1 x 10/100 Mbps WAN and 3 x 10/100 Mbps LAN ports.

This router is a basic, 2.4 GHz wireless router that provides reliable connectivity for small networks. Linksys has established a solid reputation as a reliable and reputable networking brand.

Linksys WRT54GP2 (WRT54GP2) pictures

The specifications below are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Linksys WRT54GP2, then don’t hesite and signal the problem to us.

Linksys WRT54GP2 (WRT54GP2) specifications

Brand	Linksys
Name	WRT54GP2
Type	WRT54GP2
Rating	★★★★★ Rated 3/5 based on 1248 user votes.
Launch	2004

Body

Dimensions	185 x 50 x 185 mm
Weight	380 g

If you have limited space available for your router, such as in a small apartment or office, the dimensions can determine whether it can fit in the designated area or not. It's important to consider the physical size of the router, including its height, width, and depth, to ensure it can be accommodated in your space. If you purchase a router online or have it shipped, the weight may affect the overall cost. Heavier routers can result in higher shipping charges, especially for international deliveries.

System

Chipset	Marvell 88W8510
RAM	32 MB
Flash	8 MB
OS	Linksys
Power supply	12 V / 1 A

The Marvell 88W8510 CPU, combined with other factors such as RAM capacity and firmware optimization, determines the overall performance and responsiveness of the router. The WRT54GP2 has 32 MB of RAM. Some advanced router features and software functionalities require a certain amount of RAM to operate properly. For example, routers with more RAM can support advanced security features, VPN services, or QoS (Quality of Service) prioritization more effectively.

The WRT54GP2 has 8 MB of flash memory. A larger flash memory allows for more storage space to accommodate future firmware upgrades. The process of upgrading the firmware on routers has become relatively simple and user-friendly over the years. The Linksys provides easy-to-use interfaces and instructions to guide users through the firmware upgrade process. The Linksys provides the appropriate power supply (12 V / 1 A) that matches the voltage requirements of the router. The power supply unit is designed to deliver the correct voltage to the router, ensuring its proper operation.

Network

Protocols	IPv4
LAN ports	3 x 10/100 Mbps
WAN ports	1 x 10/100 Mbps
Mobile network	no
VPN support	no

The WRT54GP2 router offers built-in security features to protect your network and connected devices. The majority of networking equipment, including routers, switches, and other network devices, is designed to support IPv4. The WRT54GP2 has 3 x 10/100 Mbps LAN and 1 x 10/100 Mbps WAN ports. The LAN ports of WRT54GP2 router are numbered and are used to establish wired connections between the router and devices such as computers, gaming consoles, smart TVs, network-attached storage (NAS) devices, and other network-enabled devices.

WAN ports often require specific configuration settings based on the type of internet connection provided by your ISP. If you have a high-speed internet plan with speeds exceeding 100 Mbps, you may experience a bottleneck in wired connections due to the limitation of the Fast Ethernet ports on the WRT54GP2 router.

Wireless

Antennas	1 x 2 dBi RP-SMA
2.4 GHz	yes
5 GHz	no
60 GHz	no
Standards	IEEE 802.11b/g
Class	G54
Speed	54 Mbps
Transmit power	16.5 dBm
Security	WEP
Guest network	no

This router has 1 x 2 dBi, RP-SMA antennas. Many modern routers feature multiple antennas and use Multiple-Input Multiple-Output (MIMO) technology. This technology enables simultaneous transmission and reception of multiple data streams, increasing overall throughput and improving the Wi-Fi performance. The WRT54GP2 is compatible with 2.4 GHz Wi-Fi networks. 2.4 GHz is the most widely used frequency and in some cases may be overcrowded.

802.11g routers have a maximum data transfer rate of 54 Mbps, which is significantly slower compared to more modern Wi-Fi standards. The G54 refers to the maximum combined data transfer rate supported by the router across all Wi-Fi bands. The WRT54GP2 is capable of a maximum throughput speed of 54 Mbps. The real-world speed of a WRT54GP2 router is typically lower than its theoretical maximum speed. The maximum TX power of WRT54GP2 router is 16.5 dBm. Adjusting the TX power of a router can be useful in situations where you want to optimize the Wi-Fi signal strength and coverage.

The WRT54GP2 router offers several security protocols: WEP. The WEP (Wired Equivalent Privacy) was the first security protocol for Wi-Fi networks but is now considered weak and easily compromised. It uses a static encryption key and has known vulnerabilities, so it is no longer recommended for securing Wi-Fi networks.

Connectivity

USB ports	no
Print server	no
File server	no

The WRT54GP2 router doesn't have file-server or print-server functionality.

Features

Specials	2 x RJ11 phone port

The RJ11 port on the WRT54GP2 router is used for connecting a telephone line.

Administration

Default IP	192.168.1.1
Default username	[blank]
Default password	admin

The Linksys router setup panel is accessed through a web browser. Connect your computer to the WRT54GP2 router via Wi-Fi or Ethernet cable. In the address bar of the web browser, type in the 192.168.1.1 IP address. If you are unable to log in to the setup panel of your Linksys router, performing a reset can be a helpful troubleshooting step. It is highly recommended to change the default password of your WRT54GP2 router after the initial setup. If you forget the new password in the future, you may need to perform a factory reset on the router to revert to the default settings.