Netgear Smart WiFi AC1450 router: Pros and Cons

Netgear Smart WiFi AC1450 (AC1450) pictures

The specifications below are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Netgear Smart WiFi AC1450, then don’t hesite and signal the problem to us.

Netgear Smart WiFi AC1450 (AC1450) specifications

Body

If you have limited space available for your router, such as in a small apartment or office, the dimensions can determine whether it can fit in the designated area or not. It's important to consider the physical size of the router, including its height, width, and depth, to ensure it can be accommodated in your space. If you purchase a router online or have it shipped, the weight may affect the overall cost. Heavier routers can result in higher shipping charges, especially for international deliveries.

System

The Broadcom BCM4708A0 @ 800 MHz CPU, combined with other factors such as RAM capacity and firmware optimization, determines the overall performance and responsiveness of the router. The Smart WiFi AC1450 has 256 MB of RAM. Some advanced router features and software functionalities require a certain amount of RAM to operate properly. For example, routers with more RAM can support advanced security features, VPN services, or QoS (Quality of Service) prioritization more effectively.

The Smart WiFi AC1450 has 128 MB of flash memory. A larger flash memory allows for more storage space to accommodate future firmware upgrades. The process of upgrading the firmware on routers has become relatively simple and user-friendly over the years. The Netgear provides easy-to-use interfaces and instructions to guide users through the firmware upgrade process. The Netgear provides the appropriate power supply (12 V / 2.5 A) that matches the voltage requirements of the router. The power supply unit is designed to deliver the correct voltage to the router, ensuring its proper operation.

Network

The Smart WiFi AC1450 router offers built-in security features to protect your network and connected devices. The majority of networking equipment, including routers, switches, and other network devices, is designed to support IPv4. The Smart WiFi AC1450 router is also compatible with IPv6. IPv6 provides a significantly larger address space and offers various enhancements and improvements over IPv4. The Smart WiFi AC1450 has 4 x 10/100/1000 Mbps LAN and 1 x 10/100/1000 Mbps WAN ports. The LAN ports of Smart WiFi AC1450 router are numbered and are used to establish wired connections between the router and devices such as computers, gaming consoles, smart TVs, network-attached storage (NAS) devices, and other network-enabled devices.

This router has Gigabit Ethernet LAN ports. If you have a high-speed internet plan that offers speeds of 1 Gbps or higher, gigabit Ethernet ports are essential to fully utilize the available bandwidth. WAN ports often require specific configuration settings based on the type of internet connection provided by your ISP. The Smart WiFi AC1450 router supports Gigabit speed on its WAN port, that can support speeds up to 1000 Mbps. This router ensures that you can fully utilize high-speed internet connections provided by your ISP.

Wireless

This router has 6 x 2 dBi, internal antennas. Many modern routers feature multiple antennas and use Multiple-Input Multiple-Output (MIMO) technology. This technology enables simultaneous transmission and reception of multiple data streams, increasing overall throughput and improving the Wi-Fi performance. This router is 2.4 GHz compatible. The 2.4 GHz band is widely supported by a wide range of devices, including older devices that may not be compatible with the 5 GHz band.

This router operates on both the 2.4GHz and 5GHz frequency bands, allowing you to connect devices to the most suitable band based on their capabilities and requirements. The Smart WiFi AC1450 AC Wi-Fi router is backward compatible with older Wi-Fi devices that support 802.11a/b/g/n standards. The AC1450 refers to the maximum combined data transfer rate supported by the router across all Wi-Fi bands. The Smart WiFi AC1450 is capable of a maximum throughput speed of 450 + 975 Mbps. The real-world speed of a Smart WiFi AC1450 router is typically lower than its theoretical maximum speed.

The maximum TX power of Smart WiFi AC1450 router is 20 dBm. Adjusting the TX power of a router can be useful in situations where you want to optimize the Wi-Fi signal strength and coverage. The Smart WiFi AC1450 router offers several security protocols: WPA, WPA2. The WPA2 (Wi-Fi Protected Access 2) was introduced as an improvement over WEP and provides stronger security. If WPA3 is not available, WPA2-Personal with AES encryption is still considered secure. Once the guest network is set up on your Netgear Smart WiFi AC1450 router, your guests can connect to it using the specified SSID and password. They will have internet access, while being separated from your private network.

Connectivity

USB ports can offer additional functionality depending on the router's capabilities. The USB 2 port has a maximum theoretical data transfer rate of 480 megabits per second (Mbps), which is equivalent to 60 megabytes per second (MB/s). The USB 3 ports provide a fast interface for external storage with data transfer rates of up to 4.8 Gbps. The Smart WiFi AC1450 router has print server functionality. With a USB print server, you can manage printer settings, monitor print queues, and control access to the printer from a centralized interface. This can simplify printer management and administration tasks. The Smart WiFi AC1450 router allows you to schedule automated backups of your important data to the connected USB storage device.

Administration

The Netgear router setup panel is accessed through a web browser. Connect your computer to the Smart WiFi AC1450 router via Wi-Fi or Ethernet cable. In the address bar of the web browser, type in the 192.168.1.1 IP address. If you are unable to log in to the setup panel of your Netgear router, performing a reset can be a helpful troubleshooting step. It is highly recommended to change the default password of your Smart WiFi AC1450 router after the initial setup. If you forget the new password in the future, you may need to perform a factory reset on the router to revert to the default settings.

Netgear Smart WiFi AC1450 (AC1450) comparisons

According to our statistics, the Netgear Smart WiFi AC1450 router was most often compared on our site with the following routers.

Netgear Nighthawk AX1800 WiFi 6 Netgear Nighthawk AX4 4-Stream WiFi 6 Netgear AC200 Smart WiFi 5 Netgear Dual-Band AC1600 WiFi 5 Netgear Smart WiFi Router AC1200 R6200 v2 Netgear Nighthawk X6 AC3000 Netgear Nighthawk AX12 Tri-Band WiFi 6 Netgear N750 WNDR4300 v2

If there’s information about the Netgear Smart WiFi AC1450 that you would like to see on this site, then write to us.