Netgear Smart WiFi Router AC1200 R6200 v2 (2013) review
The Netgear Smart WiFi Router AC1200 R6200 v2 (R6200V2) router released in 2013. It is powered by Broadcom BCM47081A0 @ 800 MHz chipset, 256 MB RAM and 128 MB flash. The AC1200 router is compatible with IEEE 802.11a/b/g/n/ac standards, and the maximum speed that you can get with Smart WiFi Router AC1200 R6200 v2 is 300 + 867 Mbps.
The Guest network is a useful feature of the Smart WiFi Router AC1200 R6200 v2 router that creates a separate network for guests. It has 1 x USB 3.0 port(s).
The Smart WiFi Router AC1200 R6200 v2 router has 1 x 10/100/1000 Mbps WAN and 4 x 10/100/1000 Mbps LAN ports.
Table of contents:
- Netgear Smart WiFi Router AC1200 R6200 v2 specifications
- Netgear Smart WiFi Router AC1200 R6200 v2 pictures
Netgear Smart WiFi Router AC1200 R6200 v2 (R6200V2) specifications
- Smart WiFi Router AC1200 R6200 v2
- 191 x 198.5 x 65 mm
- 430 g
The router's memory (RAM) cannot be expanded. By default, the router's flash memory is used to store the Netgear operating system.
- Broadcom BCM47081A0 @ 800 MHz
- 256 MB
- 128 MB
- Power supply
- 12 V / 2.5 A
The latest firmware supports IPv6 protocol that provides an identification and location system for computers on networks and routes traffic across the Internet.
- LAN ports
- 4 x 10/100/1000 Mbps
- WAN ports
- 1 x 10/100/1000 Mbps
- Mobile network
- VPN support
The Smart WiFi Router AC1200 R6200 v2 is compatible with 2.4 GHz Wi-Fi networks. 2.4 GHz is the most widely used frequency and in some cases may be overcrowded. The Smart WiFi Router AC1200 R6200 v2 supports the 5 GHz band. The 5 GHz band offers better noise immunity, less interference, and more available channels.
- 2 x 3 dBi
- 2.4 GHz
- 5 GHz
- 60 GHz
- IEEE 802.11a/b/g/n/ac
- 300 + 867 Mbps
- Transmit power
- 21 dBm
- Guest network
The USB 3.0 ports provide a fast interface for external storage with data transfer rates of up to 4.8 Gbps. You can attach a compatible USB printer to the Netgear Smart WiFi Router AC1200 R6200 v2 device. It has built-in NAS functionality.
- USB ports
- 1 x USB 3.0
- Print server
- File server
The default IP addresses of the Netgear Smart WiFi Router AC1200 R6200 v2 device is 192.168.1.1. These address allows you to access the router's console login page.
- Default IP
- Default username
- Default password
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Netgear Smart WiFi Router AC1200 R6200 v2, then don’t hesite and signal the problem to us.
Netgear Smart WiFi Router AC1200 R6200 v2 (R6200V2) pictures
If there’s information about the Netgear Smart WiFi Router AC1200 R6200 v2 that you would like to see on this site, then write to our email@example.com address.