RouterChart.com
Netis

Netis WF2780 5 GHz router review, is it worth it?

300 + 867 Mbps
IEEE 802.11a/b/g/n/ac
AC1200
Realtek RTL8197DN @ 660 MHz
64 MB / 8 MB

The Netis WF2780 (WF2780) router released in 2014. It is powered by Realtek RTL8197DN @ 660 MHz chipset, 64 MB of RAM and 8 MB of flash. The AC1200 router is compatible with IEEE 802.11a/b/g/n/ac standards, and the maximum speed that you can get with WF2780 is 300 + 867 Mbps. The router has 1 x 10/100/1000 Mbps WAN and 4 x 10/100/1000 Mbps LAN ports.

The WF2780 is a powerful and feature-packed router that caters to advanced networking requirements. Netis routers are generally known for their user-friendly design and easy setup process.

Table of contents:

Netis WF2780 (WF2780) specifications

BrandNetis
NameWF2780
TypeWF2780
Rating
Rated 3/5 based on 1142 user votes.
Launch2014

Body

Dimensions145 x 155 x 35 mm
Weight285 g

If you have limited space available for your router, such as in a small apartment or office, the dimensions can determine whether it can fit in the designated area or not. It's important to consider the physical size of the router, including its height, width, and depth, to ensure it can be accommodated in your space. If you purchase a router online or have it shipped, the weight may affect the overall cost. Heavier routers can result in higher shipping charges, especially for international deliveries.

System

ChipsetRealtek RTL8197DN @ 660 MHz
RAM64 MB
Flash8 MB
OSNetis
Power supply12 V / 1 A

The Realtek RTL8197DN @ 660 MHz CPU, combined with other factors such as RAM capacity and firmware optimization, determines the overall performance and responsiveness of the router. The WF2780 has 64 MB of RAM. Some advanced router features and software functionalities require a certain amount of RAM to operate properly. For example, routers with more RAM can support advanced security features, VPN services, or QoS (Quality of Service) prioritization more effectively.

The WF2780 has 8 MB of flash memory. A larger flash memory allows for more storage space to accommodate future firmware upgrades. The process of upgrading the firmware on routers has become relatively simple and user-friendly over the years. The Netis provides easy-to-use interfaces and instructions to guide users through the firmware upgrade process. The Netis provides the appropriate power supply (12 V / 1 A) that matches the voltage requirements of the router. The power supply unit is designed to deliver the correct voltage to the router, ensuring its proper operation.

Network

ProtocolsIPv4
IPv6
LAN ports4 x 10/100/1000 Mbps
WAN ports1 x 10/100/1000 Mbps
Mobile networkno
VPN supportno

The WF2780 router offers built-in security features to protect your network and connected devices. The majority of networking equipment, including routers, switches, and other network devices, is designed to support IPv4. The WF2780 router is also compatible with IPv6. IPv6 provides a significantly larger address space and offers various enhancements and improvements over IPv4. The WF2780 has 4 x 10/100/1000 Mbps LAN and 1 x 10/100/1000 Mbps WAN ports. The LAN ports of WF2780 router are numbered and are used to establish wired connections between the router and devices such as computers, gaming consoles, smart TVs, network-attached storage (NAS) devices, and other network-enabled devices.

This router has Gigabit Ethernet LAN ports. If you have a high-speed internet plan that offers speeds of 1 Gbps or higher, gigabit Ethernet ports are essential to fully utilize the available bandwidth. WAN ports often require specific configuration settings based on the type of internet connection provided by your ISP. The WF2780 router supports Gigabit speed on its WAN port, that can support speeds up to 1000 Mbps. This router ensures that you can fully utilize high-speed internet connections provided by your ISP.

Wireless

Antennas4 x 5 dBi
fixed
2.4 GHzyes
5 GHzyes
60 GHzno
StandardsIEEE 802.11a/b/g/n/ac
ClassAC1200
Speed300 + 867 Mbps
Transmit power20 dBm
SecurityWEP
WPA
WPA2
WPS
Guest networkno

This router has 4 x 5 dBi, fixed antennas. Many modern routers feature multiple antennas and use Multiple-Input Multiple-Output (MIMO) technology. This technology enables simultaneous transmission and reception of multiple data streams, increasing overall throughput and improving the Wi-Fi performance. The WF2780 supports the 2.4 GHz Wi-Fi. It is one of the most common frequency bands used for Wi-Fi networks.

This router operates on both the 2.4GHz and 5GHz frequency bands, allowing you to connect devices to the most suitable band based on their capabilities and requirements. The WF2780 AC Wi-Fi router is backward compatible with older Wi-Fi devices that support 802.11a/b/g/n standards. The AC1200 refers to the maximum combined data transfer rate supported by the router across all Wi-Fi bands. The WF2780 is capable of a maximum throughput speed of 300 + 867 Mbps. The real-world speed of a WF2780 router is typically lower than its theoretical maximum speed.

The maximum TX power of WF2780 router is 20 dBm. Adjusting the TX power of a router can be useful in situations where you want to optimize the Wi-Fi signal strength and coverage. The WF2780 router offers several security protocols: WEP, WPA, WPA2, WPS. The WEP (Wired Equivalent Privacy) was the first security protocol for Wi-Fi networks but is now considered weak and easily compromised. It uses a static encryption key and has known vulnerabilities, so it is no longer recommended for securing Wi-Fi networks.

The WPA2 (Wi-Fi Protected Access 2) was introduced as an improvement over WEP and provides stronger security. If WPA3 is not available, WPA2-Personal with AES encryption is still considered secure. The WF2780 router offers WPS. The WPS (Wi-Fi Protected Setup) provides a simplified and convenient method for connecting devices to a Wi-Fi network. Instead of manually entering the Wi-Fi network name (SSID) and password, users can use the WPS feature to establish a connection with the push of a button or by entering a PIN.

Connectivity

USB portsno
Print serverno
File serverno

The WF2780 router doesn't have file-server or print-server functionality.

Administration

Default IP192.168.1.1
Default username[blank]
Default password[blank]

The Netis router setup panel is accessed through a web browser. Connect your computer to the WF2780 router via Wi-Fi or Ethernet cable. In the address bar of the web browser, type in the 192.168.1.1 IP address. If you are unable to log in to the setup panel of your Netis router, performing a reset can be a helpful troubleshooting step. It is highly recommended to change the default password of your WF2780 router after the initial setup. If you forget the new password in the future, you may need to perform a factory reset on the router to revert to the default settings.

The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Netis WF2780, then don’t hesite and signal the problem to us.

Netis WF2780 (WF2780) pictures

Netis WF2780 / WF2780 photo
Netis WF2780 / WF2780 photo
Netis WF2780 / WF2780 photo
Netis WF2780 / WF2780 photo
Netis WF2780 / WF2780 photo
Netis WF2780 / WF2780

If there’s information about the Netis WF2780 that you would like to see on this site, then write to our webmaster@routerchart.com address.

RouterChart.com / Routers / Netis / Netis WF2780 (2014)
© 2023 RouterChart.com. All rights reserved.
Back to Top