RouterChart.com
Sitecom

Sitecom AC1900 High Coverage Wi-Fi Router (2016) review

600 + 1300 Mbps
IEEE 802.11a/b/g/n/ac
AC1900
Broadcom BCM4709 @ 1 GHz
128 MB / 16 MB

The Sitecom AC1900 High Coverage Wi-Fi Router (WLR-9000) router released in 2016. It is powered by Broadcom BCM4709 @ 1 GHz chipset, 128 MB RAM and 16 MB flash. The AC1900 router is compatible with IEEE 802.11a/b/g/n/ac standards, and the maximum speed that you can get with AC1900 High Coverage Wi-Fi Router is 600 + 1300 Mbps.

The Guest network is a useful feature of the AC1900 High Coverage Wi-Fi Router router that creates a separate network for guests. It has 1 x USB 2.0, 1 x USB 3.0 port(s).

The AC1900 High Coverage Wi-Fi Router router has 1 x 10/100/1000 Mbps WAN and 4 x 10/100/1000 Mbps LAN ports.

Table of contents:

Sitecom AC1900 High Coverage Wi-Fi Router (WLR-9000) specifications

BrandSitecom
NameAC1900 High Coverage Wi-Fi Router
TypeWLR-9000
Rating
Rated 4/5 based on 1069 user votes.
Launch2016

Body

Dimensions265 x 180 x 30 mm

System

The router's memory (RAM) cannot be expanded. By default, the router's flash memory is used to store the Sitecom operating system.

ChipsetBroadcom BCM4709 @ 1 GHz
RAM128 MB
Flash16 MB
OSSitecom
Power supply12 V / 1.5 A

Network

The latest firmware supports IPv6 protocol that provides an identification and location system for computers on networks and routes traffic across the Internet.

ProtocolsIPv4
IPv6
LAN ports4 x 10/100/1000 Mbps
WAN ports1 x 10/100/1000 Mbps
Mobile networkno
VPN supportno

Wireless

The AC1900 High Coverage Wi-Fi Router is compatible with 2.4 GHz Wi-Fi networks. 2.4 GHz is the most widely used frequency and in some cases may be overcrowded. The AC1900 High Coverage Wi-Fi Router supports the 5 GHz band. The 5 GHz band offers better noise immunity, less interference, and more available channels.

Antennas4 x 5 dBi
RP-SMA
2.4 GHzyes
5 GHzyes
60 GHzno
StandardsIEEE 802.11a/b/g/n/ac
ClassAC1900
Speed600 + 1300 Mbps
Transmit power24 dBm
SecurityWEP
WPA
WPA2
WPS
Guest networkyes

Connectivity

The USB 3.0 ports provide a fast interface for external storage with data transfer rates of up to 4.8 Gbps. You can attach a compatible USB printer to the Sitecom AC1900 High Coverage Wi-Fi Router device. It has built-in NAS functionality.

USB ports1 x USB 2.0
1 x USB 3.0
Print serveryes
File serveryes

Administration

The default IP addresses of the Sitecom AC1900 High Coverage Wi-Fi Router device is 192.168.0.1. These address allows you to access the router's console login page.

Default IP192.168.0.1
Default usernameadmin
Default password[on the label]

The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Sitecom AC1900 High Coverage Wi-Fi Router, then don’t hesite and signal the problem to us.

Sitecom AC1900 High Coverage Wi-Fi Router (WLR-9000) pictures

Sitecom AC1900 High Coverage Wi-Fi Router / WLR-9000 photo Sitecom AC1900 High Coverage Wi-Fi Router / WLR-9000 photo Sitecom AC1900 High Coverage Wi-Fi Router / WLR-9000 photo Sitecom AC1900 High Coverage Wi-Fi Router / WLR-9000 photo Sitecom AC1900 High Coverage Wi-Fi Router / WLR-9000 photo
Sitecom AC1900 High Coverage Wi-Fi Router / WLR-9000

If there’s information about the Sitecom AC1900 High Coverage Wi-Fi Router that you would like to see on this site, then write to our webmaster@routerchart.com address.

RouterChart.com / Routers / Sitecom / Sitecom AC1900 High Coverage Wi-Fi Router (2016)
© 2023 RouterChart.com. All rights reserved.
Back to Top