Tenda N150 (2013) review
The Tenda N150 (N150) router released in 2013. It is powered by Broadcom BCM5356C0 @ 300 MHz chipset, 16 MB RAM and 2 MB flash. The N150 router is compatible with IEEE 802.11b/g/n standards, and the maximum speed that you can get with N150 is 150 Mbps.
The N150 router has 1 x 10/100 Mbps WAN and 3 x 10/100 Mbps LAN ports.
Table of contents:
Tenda N150 (N150) specifications
|Dimensions||127.4 x 90.5 x 26 mm|
The router's memory (RAM) cannot be expanded. By default, the router's flash memory is used to store the Tenda operating system.
|Chipset||Broadcom BCM5356C0 @ 300 MHz|
|Power supply||9 V / 0.6 A|
|LAN ports||3 x 10/100 Mbps|
|WAN ports||1 x 10/100 Mbps|
The N150 is compatible with 2.4 GHz Wi-Fi networks. 2.4 GHz is the most widely used frequency and in some cases may be overcrowded.
|Antennas||1 x 5 dBi|
|Transmit power||20 dBm|
The default IP addresses of the Tenda N150 device is 192.168.0.1. These address allows you to access the router's console login page.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Tenda N150, then don’t hesite and signal the problem to us.
Tenda N150 (N150) pictures
If there’s information about the Tenda N150 that you would like to see on this site, then write to our firstname.lastname@example.org address.