Tenda TX3 WiFi router: Pros and Cons

Tenda TX3 (TX3) pictures

The specifications below are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Tenda TX3, then don’t hesite and signal the problem to us.

Tenda TX3 (TX3) specifications

Body

The dimensions and design of a router can impact its cooling capabilities. Routers with larger dimensions may have more space for internal cooling mechanisms, such as larger fans or heat sinks, which can help dissipate heat more effectively. If you purchase a router online or have it shipped, the weight may affect the overall cost. Heavier routers can result in higher shipping charges, especially for international deliveries.

System

The Tenda TX3 router is equipped with Broadcom BCM6750 @ 1.5 GHz processor. The TX3 has 256 MB of RAM. Some advanced router features and software functionalities require a certain amount of RAM to operate properly. For example, routers with more RAM can support advanced security features, VPN services, or QoS (Quality of Service) prioritization more effectively. The TX3 has 16 MB of flash memory. A larger flash memory allows for more storage space to accommodate future firmware upgrades.

The process of upgrading the firmware on routers has become relatively simple and user-friendly over the years. The Tenda provides easy-to-use interfaces and instructions to guide users through the firmware upgrade process. The Tenda TX3 router comes with 12 V / 1 A PSU. This unit is responsible for providing electrical power to the router, and if it becomes faulty, it can be replaced with a new, compatible one.

Network

The TX3 router offers built-in security features to protect your network and connected devices. The IPv4 is the fourth iteration of the Internet Protocol (IP) and is the most widely used version of IP on the internet today. The latest firmware supports IPv6 protocol that provides an identification and location system for computers on networks and routes traffic across the Internet. The Tenda TX3 has 3 x 10/100/1000 Mbps LAN and 1 x 10/100/1000 Mbps WAN ports. LAN or Ethernet ports (RJ-45) are used to connect devices to the local area network (LAN).

This router has Gigabit Ethernet LAN ports. If you have a high-speed internet plan that offers speeds of 1 Gbps or higher, gigabit Ethernet ports are essential to fully utilize the available bandwidth. WAN ports often require specific configuration settings based on the type of internet connection provided by your ISP. The TX3 router supports Gigabit speed on its WAN port, that can support speeds up to 1000 Mbps. This router ensures that you can fully utilize high-speed internet connections provided by your ISP. PPTP uses the Password Authentication Protocol (PAP) or Challenge Handshake Authentication Protocol (CHAP) for user authentication. However, the authentication process itself does not provide strong security guarantees.

Wireless

This router has 4 x 6 dBi, fixed antennas. Antennas play a significant role in Wi-Fi performance and coverage. They are essential components of wireless routers that transmit and receive radio signals to establish wireless connections with devices. The TX3 supports the 2.4 GHz Wi-Fi. It is one of the most common frequency bands used for Wi-Fi networks. The TX3 supports the 5 GHz band too. The 5 GHz band offers better noise immunity, less interference, and more available channels.

This router is a Wi-Fi 6 router. 802.11ax is the sixth-generation Wi-Fi standard, commonly referred to as Wi-Fi 6. It builds upon the previous Wi-Fi 5 (802.11ac) standard and brings significant improvements in speed, capacity, and overall performance. The AX1800 refers to the maximum combined data transfer rate supported by the router across all Wi-Fi bands. The TX3 is capable of a maximum throughput speed of 574 + 1201 Mbps. The real-world speed of a TX3 router is typically lower than its theoretical maximum speed.

The TX power (23 dBm) of a router refers to the transmission power or signal strength at which the router broadcasts its Wi-Fi signal. It determines the range and coverage area of the wireless network. The TX3 router offers several security protocols: WPA, WPA2, WPA3, WPS. The WPA2 (Wi-Fi Protected Access 2) was introduced as an improvement over WEP and provides stronger security. If WPA3 is not available, WPA2-Personal with AES encryption is still considered secure.

The WPA3 (Wi-Fi Protected Access 3) is the latest Wi-Fi security protocol designed to address vulnerabilities and strengthen security for wireless networks. It improves encryption, introduces stronger authentication protocols, and protects against brute-force attacks. The TX3 router offers WPS. The WPS (Wi-Fi Protected Setup) provides a simplified and convenient method for connecting devices to a Wi-Fi network. Instead of manually entering the Wi-Fi network name (SSID) and password, users can use the WPS feature to establish a connection with the push of a button or by entering a PIN. A guest network on the TX3 router is a separate network that provides internet access to guests or visitors without giving them access to your main or primary network. It allows you to create a dedicated network segment for guests, keeping their devices isolated from your private network, thereby enhancing security and privacy.

Connectivity

The TX3 router doesn't have file-server or print-server functionality.

Administration

The default IP addresses of the Tenda TX3 device is 192.168.0.1. These address allows you to access the router's console login page.

Tenda TX3 (TX3) comparisons

According to our statistics, the Tenda TX3 router was most often compared on our site with the following routers.

Tenda W316R Tenda AC8 Tenda AC10 v3 Tenda FH330 Tenda FH1206 Tenda AC9 Tenda F6 v4 Tenda AC5 v3

If there’s information about the Tenda TX3 that you would like to see on this site, then write to us.