TP-Link Archer AX3200 WiFi router: Pros and Cons

TP-Link Archer AX3200 (AX3200) pictures

The specifications below are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the TP-Link Archer AX3200, then don’t hesite and signal the problem to us.

TP-Link Archer AX3200 (AX3200) specifications

Body

If you plan to move or travel frequently and need to take your router with you, the dimensions become important for portability. Smaller and more compact routers are generally easier to transport, while larger routers with external antennas or multiple ports may be bulkier and less convenient to carry. If you purchase a router online or have it shipped, the weight may affect the overall cost. Heavier routers can result in higher shipping charges, especially for international deliveries.

System

The Broadcom BCM6755 @ 1.5 GHz CPU provides processing power to handle various tasks and services within the Archer AX3200 router. The Archer AX3200 has 256 MB of RAM. Some advanced router features and software functionalities require a certain amount of RAM to operate properly. For example, routers with more RAM can support advanced security features, VPN services, or QoS (Quality of Service) prioritization more effectively.

The Archer AX3200 has 128 MB of flash memory. A larger flash memory allows for more storage space to accommodate future firmware upgrades. The process of upgrading the firmware on routers has become relatively simple and user-friendly over the years. The TP-Link provides easy-to-use interfaces and instructions to guide users through the firmware upgrade process. The TP-Link packages the Archer AX3200 router with 12 V / 3.3 A PSU. A good PSU is an essential component of a computer or electronic device that converts electrical power from an outlet into the appropriate voltage and current required to power the internal components of the device.

Network

The Archer AX3200 router offers built-in security features to protect your network and connected devices. The IPv4 uses 32-bit addresses, represented as four sets of numbers separated by periods (e.g. 192.168.0.1). The Archer AX3200 router also supports IPv6 protocol, allowing you to utilize the latest version of the Internet Protocol. The LAN ports are physical connectors on a Archer AX3200 router that allow you to connect devices to your local network using Ethernet cables.

This router has Gigabit Ethernet LAN ports. If you have a high-speed internet plan that offers speeds of 1 Gbps or higher, gigabit Ethernet ports are essential to fully utilize the available bandwidth. WAN ports often require specific configuration settings based on the type of internet connection provided by your ISP. The Archer AX3200 router supports Gigabit speed on its WAN port, that can support speeds up to 1000 Mbps. This router ensures that you can fully utilize high-speed internet connections provided by your ISP.

The Archer AX3200 router also supports 2.5 Gigabit Ethernet on its WAN port. The Archer AX3200 comes with built-in OpenVPN client. OpenVPN employs a certificate-based authentication system, which enhances security and provides a more robust method of identity verification compared to traditional username/password authentication. PPTP uses the Password Authentication Protocol (PAP) or Challenge Handshake Authentication Protocol (CHAP) for user authentication. However, the authentication process itself does not provide strong security guarantees.

Wireless

The 6 x 3 dBi fixed, 1 x 3 dBi internal antennas of Archer AX3200 influence the quality and stability of the Wi-Fi signal. A properly positioned and well-designed antenna can minimize interference and signal degradation, leading to a more reliable and stable connection. This router is 2.4 GHz capable. The 2.4GHz band refers to the portion of the radio spectrum between 2.400 and 2.4835 gigahertz. This frequency range is unlicensed and globally available for various wireless applications, including Wi-Fi.

The Archer AX3200 supports 5 GHz signals. Most modern devices, such as smartphones, tablets, laptops, and smart TVs, support dual-band Wi-Fi, which means they can connect to both 2.4 GHz and 5 GHz networks. By utilizing the 5 GHz band, you can offload some devices from the crowded 2.4 GHz band, reducing congestion and improving overall network performance. This AX Wi-Fi router provides significantly faster data transfer rates compared to older Wi-Fi standards. They can support higher speeds and increased capacity, allowing for smoother streaming, faster downloads, and improved overall network performance.

The AX3200 refers to the maximum combined data transfer rate supported by the router across all Wi-Fi bands. The Archer AX3200 is capable of a maximum throughput speed of 574 + 1201 + 1440 Mbps. The real-world speed of a Archer AX3200 router is typically lower than its theoretical maximum speed. The TX power of Archer AX3200 can be adjusted by the user or set automatically by the router firmware. Higher TX power values indicate stronger signal transmission, which can result in a larger coverage area.

The Archer AX3200 router offers several security protocols: WEP, WPA, WPA2, WPA3, WPS. The WEP (Wired Equivalent Privacy) was the first security protocol for Wi-Fi networks but is now considered weak and easily compromised. It uses a static encryption key and has known vulnerabilities, so it is no longer recommended for securing Wi-Fi networks. The WPA2 (Wi-Fi Protected Access 2) was introduced as an improvement over WEP and provides stronger security. If WPA3 is not available, WPA2-Personal with AES encryption is still considered secure.

The WPA3 (Wi-Fi Protected Access 3) is the latest Wi-Fi security protocol designed to address vulnerabilities and strengthen security for wireless networks. It improves encryption, introduces stronger authentication protocols, and protects against brute-force attacks. The Archer AX3200 router offers WPS. The WPS (Wi-Fi Protected Setup) provides a simplified and convenient method for connecting devices to a Wi-Fi network. Instead of manually entering the Wi-Fi network name (SSID) and password, users can use the WPS feature to establish a connection with the push of a button or by entering a PIN. The TP-Link Archer AX3200 router is capable of creating a guest network. Guests connected to the guest network usually have limited access to network settings and configurations. They are typically restricted from accessing devices connected to the primary network, such as printers, network-attached storage (NAS), or other shared resources.

Connectivity

USB ports can offer additional functionality depending on the router's capabilities. The USB 2 port has a maximum theoretical data transfer rate of 480 megabits per second (Mbps), which is equivalent to 60 megabytes per second (MB/s). The USB 3 ports provide a fast interface for external storage with data transfer rates of up to 4.8 Gbps. By connecting a USB printer to the Archer AX3200 router, you can make it accessible to all devices on your network. This eliminates the need for individual printer connections and allows multiple devices to use the printer simultaneously. The USB file server functionality of this router allows you to connect external storage devices, such as USB flash drives or hard drives to your network. This enables easy file sharing and access among devices connected to the network.

Administration

The default IP address of this router is 192.168.0.1. Explore the router's configuration interface to access more advanced settings such as port forwarding, DHCP settings, parental controls, firewall settings, and QoS (Quality of Service) settings. If you are unable to log in to the setup panel of your TP-Link router, performing a reset can be a helpful troubleshooting step. It is highly recommended to change the default password of your Archer AX3200 router after the initial setup. If you forget the new password in the future, you may need to perform a factory reset on the router to revert to the default settings.

TP-Link Archer AX3200 (AX3200) comparisons

According to our statistics, the TP-Link Archer AX3200 router was most often compared on our site with the following routers.

TP-Link Archer C1200 TP-Link Archer C2600 TP-Link AC1900 Touch P5 TP-Link TL-WR1043ND v1 TP-Link Archer C6 TP-Link Archer C2300 TP-Link Archer C80 TP-Link TL-WR843ND

If there’s information about the TP-Link Archer AX3200 that you would like to see on this site, then write to us.