RouterChart.com
TP-Link

TP-Link Archer GX90 (2020) review

574 + 1201 + 4804 Mbps
IEEE 802.11a/b/g/n/ac/ax
AX6600
Broadcom BCM6755 @ 1.5 GHz
256 MB / 128 MB

The TP-Link Archer GX90 (GX90) router released in 2020. It is powered by Broadcom BCM6755 @ 1.5 GHz chipset, 256 MB RAM and 128 MB flash. The AX6600 router is compatible with IEEE 802.11a/b/g/n/ac/ax standards, and the maximum speed that you can get with Archer GX90 is 574 + 1201 + 4804 Mbps.

The Guest network is a useful feature of the Archer GX90 router that creates a separate network for guests. It has 1 x USB 2.0, 1 x USB 3.0 port(s).

The Archer GX90 router has 1 x 10/100/1000/2500 Mbps WAN and 4 x 10/100/1000 Mbps LAN ports.

Table of contents:

TP-Link Archer GX90 (GX90) specifications

BrandTP-Link
NameArcher GX90
TypeGX90
Rating
Rated 4/5 based on 715 user votes.
Launch2020

Body

Dimensions212 x 212 x 51.8 mm
Weight940 g

System

The router's memory (RAM) cannot be expanded. By default, the router's flash memory is used to store the TP-Link operating system.

ChipsetBroadcom BCM6755 @ 1.5 GHz
RAM256 MB
Flash128 MB
OSTP-Link
Power supply12 V / 5 A

Network

The latest firmware supports IPv6 protocol that provides an identification and location system for computers on networks and routes traffic across the Internet. The Archer GX90 comes with OpenVPN support. OpenVPN is a full-featured SSL VPN solution which implements OSI layer 2 or 3 secure network extension using the industry standard SSL/TLS protocol.

ProtocolsIPv4
IPv6
LAN ports4 x 10/100/1000 Mbps
WAN ports1 x 10/100/1000/2500 Mbps
Mobile networkno
VPN supportPPTP
OpenVPN

Wireless

The Archer GX90 is compatible with 2.4 GHz Wi-Fi networks. 2.4 GHz is the most widely used frequency and in some cases may be overcrowded. The Archer GX90 supports the 5 GHz band. The 5 GHz band offers better noise immunity, less interference, and more available channels.

Antennas8 x 4 dBi
RP-SMA
2.4 GHzyes
5 GHzyes
6 GHzno
60 GHzno
StandardsIEEE 802.11a/b/g/n/ac/ax
ClassAX6600
Speed574 + 1201 + 4804 Mbps
Transmit power30 dBm
SecurityWPA
WPA2
WPA3
WPS
Guest networkyes

Connectivity

The USB 3.0 ports provide a fast interface for external storage with data transfer rates of up to 4.8 Gbps. You can attach a compatible USB printer to the TP-Link Archer GX90 device. It has built-in NAS functionality.

USB ports1 x USB 2.0
1 x USB 3.0
Print serveryes
File serveryes

Administration

The default IP addresses of the TP-Link Archer GX90 device is 192.168.0.1. These address allows you to access the router's console login page.

Default IP192.168.0.1
Default usernameadmin
Default passwordadmin

The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the TP-Link Archer GX90, then don’t hesite and signal the problem to us.

TP-Link Archer GX90 (GX90) pictures

TP-Link Archer GX90 / GX90 photo TP-Link Archer GX90 / GX90 photo TP-Link Archer GX90 / GX90 photo TP-Link Archer GX90 / GX90 photo
TP-Link Archer GX90 / GX90

If there’s information about the TP-Link Archer GX90 that you would like to see on this site, then write to our webmaster@routerchart.com address.

RouterChart.com / Routers / TP-Link / TP-Link Archer GX90 (2020)
© 2023 RouterChart.com. All rights reserved.
Back to Top