TP-Link TL-WR802N 2.4 GHz router review, is it worth it?

The TP-Link TL-WR802N (TL-WR802N) router released in 2015. It is powered by Qualcomm Atheros QCA9533 @ 550 MHz chipset, 32 MB of RAM and 4 MB of flash. The N300 router is compatible with IEEE 802.11b/g/n standards, and the maximum speed that you can get with TL-WR802N is 300 Mbps. The router has 1 x 10/100 Mbps WAN and no LAN ports.

Operating on the 2.4 GHz frequency band, the TL-WR802N router offers decent wireless coverage and compatibility with a wide range of devices. TP-Link is a well-established brand and has a significant market presence globally.

Table of contents:

• TP-Link TL-WR802N specifications
• TP-Link TL-WR802N pictures

TP-Link TL-WR802N (TL-WR802N) specifications

Body

The dimensions and design of a router can impact its cooling capabilities. Routers with larger dimensions may have more space for internal cooling mechanisms, such as larger fans or heat sinks, which can help dissipate heat more effectively.

System

The TP-Link TL-WR802N router is equipped with Qualcomm Atheros QCA9533 @ 550 MHz processor. The router's memory (32 MB) cannot be expanded. When choosing a router, it is important to consider both the flash memory and RAM specifications. The TL-WR802N has 4 MB of flash. A larger flash memory allows for more space to store configuration backups. It enables you to save multiple versions of your router's configuration settings, which can be useful for restoring previous configurations or reverting changes if needed.

Within the TL-WR802N router's interface, look for a section related to firmware or system settings. The exact location and wording may vary depending on the router's make and model. The TP-Link TL-WR802N router comes with 5 V / 0.5 A, microUSB PSU. This unit is responsible for providing electrical power to the router, and if it becomes faulty, it can be replaced with a new, compatible one.

Network

The TL-WR802N router supports multiple networking standards to ensure compatibility with various devices and systems. The IPv4 is the fourth iteration of the Internet Protocol (IP) and is the most widely used version of IP on the internet today. The TP-Link TL-WR802N has no LAN and 1 x 10/100 Mbps WAN ports. LAN or Ethernet ports (RJ-45) are used to connect devices to the local area network (LAN). WAN ports are the entry point to your local network, making them a potential target for unauthorized access or attacks. It's important to secure your WAN connection by using strong passwords, enabling encryption protocols, and keeping the router's firmware up to date to mitigate security risks. The WAN port on the TL-WR802N router is a Fast Ethernet port, not a Gigabit Ethernet. The Fast Ethernet ports are capable of supporting speeds up to 100 Mbps, which is still suitable for most internet connections.

Wireless

This router has 1 x 2 dBi, internal antennas. Antennas play a significant role in Wi-Fi performance and coverage. They are essential components of wireless routers that transmit and receive radio signals to establish wireless connections with devices. This router is 2.4 GHz capable. The 2.4GHz band refers to the portion of the radio spectrum between 2.400 and 2.4835 gigahertz. This frequency range is unlicensed and globally available for various wireless applications, including Wi-Fi.

The TL-WR802N is a Wi-Fi 4 (802.11n) router. Wi-Fi 4 improved the range and coverage compared to previous Wi-Fi standards. The use of MIMO technology and other enhancements help to mitigate signal degradation and provide better coverage in larger homes or office environments. This allows devices to maintain a stable connection even when located farther away from the Wi-Fi router. The N300 is a performance indicator that represents the router's theoretical maximum speed.

The theoretical maximum speed (300 Mbps) represents the highest data transfer rate that the router is capable of achieving under ideal conditions. The TX power (20 dBm) of a router refers to the transmission power or signal strength at which the router broadcasts its Wi-Fi signal. It determines the range and coverage area of the wireless network. The TL-WR802N router offers several security protocols: WEP, WPA, WPA2, WPS.

The WEP (Wired Equivalent Privacy) was the first security protocol for Wi-Fi networks but is now considered weak and easily compromised. It uses a static encryption key and has known vulnerabilities, so it is no longer recommended for securing Wi-Fi networks. The WPA2 (Wi-Fi Protected Access 2) was introduced as an improvement over WEP and provides stronger security. If WPA3 is not available, WPA2-Personal with AES encryption is still considered secure. The TL-WR802N router offers WPS. The WPS (Wi-Fi Protected Setup) provides a simplified and convenient method for connecting devices to a Wi-Fi network. Instead of manually entering the Wi-Fi network name (SSID) and password, users can use the WPS feature to establish a connection with the push of a button or by entering a PIN.

Connectivity

The TL-WR802N router doesn't have file-server or print-server functionality.

Administration

The default IP addresses of the TP-Link TL-WR802N device is 192.168.1.1. These address allows you to access the router's console login page. Regularly changing the password is a good security practice to protect your network and devices from unauthorized access. It is also recommended to use strong, unique passwords for other devices and online accounts connected to your network for enhanced security. By changing the default password, you improve the security of your router and reduce the risk of unauthorized individuals gaining control over your network. It helps prevent unauthorized access to your router's settings, network configurations, and sensitive information.

The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the TP-Link TL-WR802N, then don’t hesite and signal the problem to us.

TP-Link TL-WR802N (TL-WR802N) pictures

If there’s information about the TP-Link TL-WR802N that you would like to see on this site, then write to our webmaster@routerchart.com address.