TRENDnet N300 TEW-722BRM WiFi router: Pros and Cons
The TRENDnet N300 TEW-722BRM (TEW-722BRM) router released in 2015. It is powered by Realtek RTL8676S @ 450 MHz chipset, 32 MB of RAM and 8 MB of flash. The N300 router is compatible with IEEE 802.11b/g/n standards, and the maximum speed that you can get with N300 TEW-722BRM is 300 Mbps. The router has 1 x ADSL WAN and 4 x 10/100 Mbps LAN ports.
The N300 TEW-722BRM is an affordable and reliable router designed for basic networking needs. TRENDnet routers are generally known for their user-friendly design and easy setup process.
TRENDnet N300 TEW-722BRM (TEW-722BRM) pictures
The specifications below are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the TRENDnet N300 TEW-722BRM, then don’t hesite and signal the problem to us.
TRENDnet N300 TEW-722BRM (TEW-722BRM) specifications
|Dimensions||126 x 109 x 25 mm|
The dimensions and design of a router can impact its cooling capabilities. Routers with larger dimensions may have more space for internal cooling mechanisms, such as larger fans or heat sinks, which can help dissipate heat more effectively. If you purchase a router online or have it shipped, the weight may affect the overall cost. Heavier routers can result in higher shipping charges, especially for international deliveries.
|Chipset||Realtek RTL8676S @ 450 MHz|
|Power supply||12 V / 0.5 A|
The TRENDnet N300 TEW-722BRM router is equipped with Realtek RTL8676S @ 450 MHz processor. The N300 TEW-722BRM has 32 MB of RAM. Some advanced router features and software functionalities require a certain amount of RAM to operate properly. For example, routers with more RAM can support advanced security features, VPN services, or QoS (Quality of Service) prioritization more effectively. The N300 TEW-722BRM has 8 MB of flash memory. A larger flash memory allows for more storage space to accommodate future firmware upgrades.
The process of upgrading the firmware on routers has become relatively simple and user-friendly over the years. The TRENDnet provides easy-to-use interfaces and instructions to guide users through the firmware upgrade process. The TRENDnet N300 TEW-722BRM router comes with 12 V / 0.5 A PSU. This unit is responsible for providing electrical power to the router, and if it becomes faulty, it can be replaced with a new, compatible one.
|LAN ports||4 x 10/100 Mbps|
|WAN ports||1 x ADSL|
The N300 TEW-722BRM router offers built-in security features to protect your network and connected devices. The IPv4 is the fourth iteration of the Internet Protocol (IP) and is the most widely used version of IP on the internet today. The latest firmware supports IPv6 protocol that provides an identification and location system for computers on networks and routes traffic across the Internet. The TRENDnet N300 TEW-722BRM has 4 x 10/100 Mbps LAN and 1 x ADSL WAN ports. LAN or Ethernet ports (RJ-45) are used to connect devices to the local area network (LAN).
WAN ports often require specific configuration settings based on the type of internet connection provided by your ISP. The WAN port on the N300 TEW-722BRM router is a Fast Ethernet port, not a Gigabit Ethernet. The Fast Ethernet ports are capable of supporting speeds up to 100 Mbps, which is still suitable for most internet connections.
|Antennas||2 x 4 dBi|
|Transmit power||15 dBm|
This router has 2 x 4 dBi, internal antennas. Antennas play a significant role in Wi-Fi performance and coverage. They are essential components of wireless routers that transmit and receive radio signals to establish wireless connections with devices. The N300 TEW-722BRM supports the 2.4 GHz Wi-Fi. It is one of the most common frequency bands used for Wi-Fi networks. The N300 TEW-722BRM is a Wi-Fi 4 (802.11n) router. Wi-Fi 4 improved the range and coverage compared to previous Wi-Fi standards. The use of MIMO technology and other enhancements help to mitigate signal degradation and provide better coverage in larger homes or office environments. This allows devices to maintain a stable connection even when located farther away from the Wi-Fi router.
The N300 refers to the maximum combined data transfer rate supported by the router across all Wi-Fi bands. The N300 TEW-722BRM is capable of a maximum throughput speed of 300 Mbps. The real-world speed of a N300 TEW-722BRM router is typically lower than its theoretical maximum speed. The TX power (15 dBm) of a router refers to the transmission power or signal strength at which the router broadcasts its Wi-Fi signal. It determines the range and coverage area of the wireless network.
The N300 TEW-722BRM router offers several security protocols: WEP, WPA, WPA2, WPS. The WEP (Wired Equivalent Privacy) was the first security protocol for Wi-Fi networks but is now considered weak and easily compromised. It uses a static encryption key and has known vulnerabilities, so it is no longer recommended for securing Wi-Fi networks. The WPA2 (Wi-Fi Protected Access 2) was introduced as an improvement over WEP and provides stronger security. If WPA3 is not available, WPA2-Personal with AES encryption is still considered secure. The N300 TEW-722BRM router offers WPS. The WPS (Wi-Fi Protected Setup) provides a simplified and convenient method for connecting devices to a Wi-Fi network. Instead of manually entering the Wi-Fi network name (SSID) and password, users can use the WPS feature to establish a connection with the push of a button or by entering a PIN.
The N300 TEW-722BRM router doesn't have file-server or print-server functionality.
The RJ11 port on the N300 TEW-722BRM router is used for connecting a telephone line.
|Default password||[on the label]|
The default IP addresses of the TRENDnet N300 TEW-722BRM device is 192.168.10.1. These address allows you to access the router's console login page. If you are unable to log in to the setup panel of your TRENDnet router, performing a reset can be a helpful troubleshooting step. It is highly recommended to change the default password of your N300 TEW-722BRM router after the initial setup. If you forget the new password in the future, you may need to perform a factory reset on the router to revert to the default settings.
TRENDnet N300 TEW-722BRM (TEW-722BRM) comparisons
According to our statistics, the TRENDnet N300 TEW-722BRM router was most often compared on our site with the following routers.
If there’s information about the TRENDnet N300 TEW-722BRM that you would like to see on this site, then write to us.