Belkin AC 1000 DB F9K1112 WiFi router: Pros and Cons
The Belkin AC 1000 DB F9K1112 (F9K1112) router released in 2012. It is powered by Broadcom BCM4718A1 @ 480 MHz chipset, 128 MB of RAM and 16 MB of flash. The AC1000 router is compatible with IEEE 802.11a/b/g/n/ac standards, and the maximum speed that you can get with AC 1000 DB F9K1112 is 300 + 650 Mbps. The router has 1 x 10/100/1000 Mbps WAN and 4 x 10/100/1000 Mbps LAN ports.
The AC 1000 DB F9K1112 is an affortable router that supports Wi-Fi 5 (802.11ac) technology for faster wireless speeds. The USB connectors on the AC 1000 DB F9K1112 router add versatility to your network by enabling file sharing, media streaming, printer sharing, and other USB-enabled functionality. Belkin is often recognized for offering products that provide good value for the price.
Belkin AC 1000 DB F9K1112 (F9K1112) pictures
The specifications below are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Belkin AC 1000 DB F9K1112, then don’t hesite and signal the problem to us.
Belkin AC 1000 DB F9K1112 (F9K1112) specifications
|Name||AC 1000 DB F9K1112|
|Chipset||Broadcom BCM4718A1 @ 480 MHz|
|Power supply||12 V / 2.5 A|
The Broadcom BCM4718A1 @ 480 MHz CPU, combined with other factors such as RAM capacity and firmware optimization, determines the overall performance and responsiveness of the router. The AC 1000 DB F9K1112 has 128 MB of RAM. Some advanced router features and software functionalities require a certain amount of RAM to operate properly. For example, routers with more RAM can support advanced security features, VPN services, or QoS (Quality of Service) prioritization more effectively.
The AC 1000 DB F9K1112 has 16 MB of flash memory. A larger flash memory allows for more storage space to accommodate future firmware upgrades. The process of upgrading the firmware on routers has become relatively simple and user-friendly over the years. The Belkin provides easy-to-use interfaces and instructions to guide users through the firmware upgrade process. The Belkin provides the appropriate power supply (12 V / 2.5 A) that matches the voltage requirements of the router. The power supply unit is designed to deliver the correct voltage to the router, ensuring its proper operation.
|LAN ports||4 x 10/100/1000 Mbps|
|WAN ports||1 x 10/100/1000 Mbps|
The AC 1000 DB F9K1112 router offers built-in security features to protect your network and connected devices. The majority of networking equipment, including routers, switches, and other network devices, is designed to support IPv4. The AC 1000 DB F9K1112 has 4 x 10/100/1000 Mbps LAN and 1 x 10/100/1000 Mbps WAN ports. The LAN ports of AC 1000 DB F9K1112 router are numbered and are used to establish wired connections between the router and devices such as computers, gaming consoles, smart TVs, network-attached storage (NAS) devices, and other network-enabled devices.
This router has Gigabit Ethernet LAN ports. If you have a high-speed internet plan that offers speeds of 1 Gbps or higher, gigabit Ethernet ports are essential to fully utilize the available bandwidth. WAN ports often require specific configuration settings based on the type of internet connection provided by your ISP. The AC 1000 DB F9K1112 router supports Gigabit speed on its WAN port, that can support speeds up to 1000 Mbps. This router ensures that you can fully utilize high-speed internet connections provided by your ISP.
|Speed||300 + 650 Mbps|
|Transmit power||20 dBm|
This router has internal antennas. Many modern routers feature multiple antennas and use Multiple-Input Multiple-Output (MIMO) technology. This technology enables simultaneous transmission and reception of multiple data streams, increasing overall throughput and improving the Wi-Fi performance. The AC 1000 DB F9K1112 is compatible with 2.4 GHz Wi-Fi networks. 2.4 GHz is the most widely used frequency and in some cases may be overcrowded.
This router operates on both the 2.4GHz and 5GHz frequency bands, allowing you to connect devices to the most suitable band based on their capabilities and requirements. The AC 1000 DB F9K1112 AC Wi-Fi router is backward compatible with older Wi-Fi devices that support 802.11a/b/g/n standards. The AC1000 refers to the maximum combined data transfer rate supported by the router across all Wi-Fi bands.
The AC 1000 DB F9K1112 is capable of a maximum throughput speed of 300 + 650 Mbps. The real-world speed of a AC 1000 DB F9K1112 router is typically lower than its theoretical maximum speed. The maximum TX power of AC 1000 DB F9K1112 router is 20 dBm. Adjusting the TX power of a router can be useful in situations where you want to optimize the Wi-Fi signal strength and coverage. The AC 1000 DB F9K1112 router offers several security protocols: WEP, WPA, WPA2, WPS.
The WEP (Wired Equivalent Privacy) was the first security protocol for Wi-Fi networks but is now considered weak and easily compromised. It uses a static encryption key and has known vulnerabilities, so it is no longer recommended for securing Wi-Fi networks. The WPA2 (Wi-Fi Protected Access 2) was introduced as an improvement over WEP and provides stronger security. If WPA3 is not available, WPA2-Personal with AES encryption is still considered secure.
The AC 1000 DB F9K1112 router offers WPS. The WPS (Wi-Fi Protected Setup) provides a simplified and convenient method for connecting devices to a Wi-Fi network. Instead of manually entering the Wi-Fi network name (SSID) and password, users can use the WPS feature to establish a connection with the push of a button or by entering a PIN. Once the guest network is set up on your Belkin AC 1000 DB F9K1112 router, your guests can connect to it using the specified SSID and password. They will have internet access, while being separated from your private network.
|USB ports||2 x USB 2.0|
USB ports can offer additional functionality depending on the router's capabilities. The USB 2 port has a maximum theoretical data transfer rate of 480 megabits per second (Mbps), which is equivalent to 60 megabytes per second (MB/s). The AC 1000 DB F9K1112 router has print server functionality. With a USB print server, you can manage printer settings, monitor print queues, and control access to the printer from a centralized interface. This can simplify printer management and administration tasks. The AC 1000 DB F9K1112 router allows you to schedule automated backups of your important data to the connected USB storage device.
The Belkin router setup panel is accessed through a web browser. Connect your computer to the AC 1000 DB F9K1112 router via Wi-Fi or Ethernet cable. In the address bar of the web browser, type in the 192.168.2.1 IP address. If you are unable to log in to the setup panel of your Belkin router, performing a reset can be a helpful troubleshooting step. It is highly recommended to change the default password of your AC 1000 DB F9K1112 router after the initial setup. If you forget the new password in the future, you may need to perform a factory reset on the router to revert to the default settings.
Belkin AC 1000 DB F9K1112 (F9K1112) comparisons
According to our statistics, the Belkin AC 1000 DB F9K1112 router was most often compared on our site with the following routers.
If there’s information about the Belkin AC 1000 DB F9K1112 that you would like to see on this site, then write to us.