RouterChart.com

Belkin AC 1200 DB F9K1113 v2 WiFi router: Pros and Cons

300 + 867 Mbps
IEEE 802.11a/b/g/n/ac
Broadcom BCM47081A0 @ 800 MHz
128 MB / 16 MB

The Belkin AC 1200 DB F9K1113 v2 (F9K1113) router released in 2013. It is powered by Broadcom BCM47081A0 @ 800 MHz chipset, 128 MB of RAM and 16 MB of flash. The AC1200 router is compatible with IEEE 802.11a/b/g/n/ac standards, and the maximum speed that you can get with AC 1200 DB F9K1113 v2 is 300 + 867 Mbps. The router has 1 x 10/100/1000 Mbps WAN and 4 x 10/100/1000 Mbps LAN ports.

The AC 1200 DB F9K1113 v2 supports dual-band Wi-Fi, offering both 2.4 GHz and 5 GHz bands. This router features USB connectors that provide additional functionality and expand the capabilities of your network. Belkin has a strong presence and offers a wide range of networking products.

Belkin AC 1200 DB F9K1113 v2 (F9K1113) pictures

Belkin AC 1200 DB F9K1113 v2 / F9K1113 photo
Belkin AC 1200 DB F9K1113 v2 / F9K1113 photo
Belkin AC 1200 DB F9K1113 v2 / F9K1113

The specifications below are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Belkin AC 1200 DB F9K1113 v2, then don’t hesite and signal the problem to us.

Belkin AC 1200 DB F9K1113 v2 (F9K1113) specifications

BrandBelkin
NameAC 1200 DB F9K1113 v2
TypeF9K1113
Rating
Rated 3/5 based on 1245 user votes.
Launch2013

System

ChipsetBroadcom BCM47081A0 @ 800 MHz
RAM128 MB
Flash16 MB
OSBelkin
Power supply12 V / 2.5 A

The Broadcom BCM47081A0 @ 800 MHz CPU provides processing power to handle various tasks and services within the AC 1200 DB F9K1113 v2 router. The router's memory (128 MB) cannot be expanded. When choosing a router, it is important to consider both the flash memory and RAM specifications. The AC 1200 DB F9K1113 v2 has 16 MB of flash. A larger flash memory allows for more space to store configuration backups. It enables you to save multiple versions of your router's configuration settings, which can be useful for restoring previous configurations or reverting changes if needed.

Within the AC 1200 DB F9K1113 v2 router's interface, look for a section related to firmware or system settings. The exact location and wording may vary depending on the router's make and model. The Belkin packages the AC 1200 DB F9K1113 v2 router with 12 V / 2.5 A PSU. A good PSU is an essential component of a computer or electronic device that converts electrical power from an outlet into the appropriate voltage and current required to power the internal components of the device.

Network

ProtocolsIPv4
IPv6
LAN ports4 x 10/100/1000 Mbps
WAN ports1 x 10/100/1000 Mbps
Mobile networkno
VPN supportno

The AC 1200 DB F9K1113 v2 router supports multiple networking standards to ensure compatibility with various devices and systems. The IPv4 uses 32-bit addresses, represented as four sets of numbers separated by periods (e.g. 192.168.0.1). The AC 1200 DB F9K1113 v2 router also supports IPv6 protocol, allowing you to utilize the latest version of the Internet Protocol. The LAN ports are physical connectors on a AC 1200 DB F9K1113 v2 router that allow you to connect devices to your local network using Ethernet cables.

Gigabit Ethernet ports of the AC 1200 DB F9K1113 v2 router allow for faster communication between devices within your local network. WAN ports are the entry point to your local network, making them a potential target for unauthorized access or attacks. It's important to secure your WAN connection by using strong passwords, enabling encryption protocols, and keeping the router's firmware up to date to mitigate security risks. The AC 1200 DB F9K1113 v2 router supports Gigabit WAN. Having a Gigabit WAN port is beneficial when your internet service plan supports high-speed connectivity, as it ensures that your router's WAN connection can handle the maximum speed provided by your ISP.

Wireless

Antennas2 x 2 dBi
internal
2.4 GHzyes
5 GHzyes
60 GHzno
StandardsIEEE 802.11a/b/g/n/ac
ClassAC1200
Speed300 + 867 Mbps
Transmit power20 dBm
SecurityWEP
WPA
WPA2
WPS
Guest networkyes

The 2 x 2 dBi, internal antennas of AC 1200 DB F9K1113 v2 influence the quality and stability of the Wi-Fi signal. A properly positioned and well-designed antenna can minimize interference and signal degradation, leading to a more reliable and stable connection. The AC 1200 DB F9K1113 v2 is compatible with 2.4 GHz Wi-Fi networks. 2.4 GHz is the most widely used frequency and in some cases may be overcrowded.

This router is 5 GHz capable. The 5GHz band provides faster data transfer speeds compared to the 2.4GHz band. This is primarily because the 5GHz band has more available channels and less interference from other devices like microwaves or cordless phones. The AC 1200 DB F9K1113 v2 Wi-Fi router supports multiple spatial streams, typically up to 4 streams. This allows for higher data throughput and improved performance, especially when multiple devices are connected to the router simultaneously.

The AC1200 is a performance indicator that represents the router's theoretical maximum speed. The theoretical maximum speed (300 + 867 Mbps) represents the highest data transfer rate that the router is capable of achieving under ideal conditions. The TX power of AC 1200 DB F9K1113 v2 can be adjusted by the user or set automatically by the router firmware. Higher TX power values indicate stronger signal transmission, which can result in a larger coverage area.

The AC 1200 DB F9K1113 v2 router offers several security protocols: WEP, WPA, WPA2, WPS. The WEP (Wired Equivalent Privacy) was the first security protocol for Wi-Fi networks but is now considered weak and easily compromised. It uses a static encryption key and has known vulnerabilities, so it is no longer recommended for securing Wi-Fi networks. The WPA2 (Wi-Fi Protected Access 2) was introduced as an improvement over WEP and provides stronger security. If WPA3 is not available, WPA2-Personal with AES encryption is still considered secure.

The AC 1200 DB F9K1113 v2 router offers WPS. The WPS (Wi-Fi Protected Setup) provides a simplified and convenient method for connecting devices to a Wi-Fi network. Instead of manually entering the Wi-Fi network name (SSID) and password, users can use the WPS feature to establish a connection with the push of a button or by entering a PIN. The Belkin AC 1200 DB F9K1113 v2 router is capable of creating a guest network. Guests connected to the guest network usually have limited access to network settings and configurations. They are typically restricted from accessing devices connected to the primary network, such as printers, network-attached storage (NAS), or other shared resources.

Connectivity

USB ports2 x USB 2.0
Print serveryes
File serveryes

USB ports can offer additional functionality depending on the router's capabilities. The USB 2 port has a maximum theoretical data transfer rate of 480 megabits per second (Mbps), which is equivalent to 60 megabytes per second (MB/s). By connecting a USB printer to the AC 1200 DB F9K1113 v2 router, you can make it accessible to all devices on your network. This eliminates the need for individual printer connections and allows multiple devices to use the printer simultaneously. The USB file server functionality of this router allows you to connect external storage devices, such as USB flash drives or hard drives to your network. This enables easy file sharing and access among devices connected to the network.

Administration

Default IP192.168.2.1
Default username[blank]
Default password[blank]

The default IP address of this router is 192.168.2.1. Explore the router's configuration interface to access more advanced settings such as port forwarding, DHCP settings, parental controls, firewall settings, and QoS (Quality of Service) settings. Regularly changing the password is a good security practice to protect your network and devices from unauthorized access. It is also recommended to use strong, unique passwords for other devices and online accounts connected to your network for enhanced security. By changing the default password, you improve the security of your router and reduce the risk of unauthorized individuals gaining control over your network. It helps prevent unauthorized access to your router's settings, network configurations, and sensitive information.

Belkin AC 1200 DB F9K1113 v2 (F9K1113) comparisons

According to our statistics, the Belkin AC 1200 DB F9K1113 v2 router was most often compared on our site with the following routers.

Belkin G54 N150 Wi-Fi F9K1009 v1 (F9K1009) Belkin G54 N150 Wi-Fi F9K1009 v1 Belkin AC1900 DB F9K1124 (F9K1124) Belkin AC1900 DB F9K1124 Belkin N300 F9K1002 v5 (F9K1002) Belkin N300 F9K1002 v5 Belkin AC 1750 DB F9K1118 v2 (F9K1118) Belkin AC 1750 DB F9K1118 v2 Belkin N450 DB F9K1105 (F9K1105) Belkin N450 DB F9K1105 Belkin AC 750 DB F9K1116 v1 (F9K1116) Belkin AC 750 DB F9K1116 v1 Belkin AC 1000 DB F9K1112 (F9K1112) Belkin AC 1000 DB F9K1112 Belkin N300 F9K1010 v2 (F9K1010V2) Belkin N300 F9K1010 v2

If there’s information about the Belkin AC 1200 DB F9K1113 v2 that you would like to see on this site, then write to us.

RouterChart.com / Routers / Belkin / Belkin AC 1200 DB F9K1113 v2 (2013)