RouterChart.com
Belkin

Belkin AC1900 DB F9K1124 (2016) review

600 + 1300 Mbps
IEEE 802.11a/b/g/n/ac
AC1900
Realtek RTL8198CS @ 1 GHz
128 MB / 16 MB

The Belkin AC1900 DB F9K1124 (F9K1124) router released in 2016. It is powered by Realtek RTL8198CS @ 1 GHz chipset, 128 MB RAM and 16 MB flash. The AC1900 router is compatible with IEEE 802.11a/b/g/n/ac standards, and the maximum speed that you can get with AC1900 DB F9K1124 is 600 + 1300 Mbps.

The Guest network is a useful feature of the AC1900 DB F9K1124 router that creates a separate network for guests. It has 1 x USB 3.0 port(s).

The AC1900 DB F9K1124 router has 1 x 10/100/1000 Mbps WAN and 4 x 10/100/1000 Mbps LAN ports.

Table of contents:

Belkin AC1900 DB F9K1124 (F9K1124) specifications

BrandBelkin
NameAC1900 DB F9K1124
TypeF9K1124
Rating
Rated 4/5 based on 1082 user votes.
Launch2016

Body

Dimensions135 x 95 x 60 mm
Weight109 g

System

The router's memory (RAM) cannot be expanded. By default, the router's flash memory is used to store the Belkin operating system.

ChipsetRealtek RTL8198CS @ 1 GHz
RAM128 MB
Flash16 MB
OSBelkin
Power supply12 V / 2.5 A

Network

The latest firmware supports IPv6 protocol that provides an identification and location system for computers on networks and routes traffic across the Internet.

ProtocolsIPv4
IPv6
LAN ports4 x 10/100/1000 Mbps
WAN ports1 x 10/100/1000 Mbps
Mobile networkno
VPN supportno

Wireless

The AC1900 DB F9K1124 is compatible with 2.4 GHz Wi-Fi networks. 2.4 GHz is the most widely used frequency and in some cases may be overcrowded. The AC1900 DB F9K1124 supports the 5 GHz band. The 5 GHz band offers better noise immunity, less interference, and more available channels.

Antennas4 x 3 dBi
internal
2.4 GHzyes
5 GHzyes
60 GHzno
StandardsIEEE 802.11a/b/g/n/ac
ClassAC1900
Speed600 + 1300 Mbps
Transmit power29 dBm
SecurityWEP
WPA
WPA2
WPS
Guest networkyes

Connectivity

The USB 3.0 ports provide a fast interface for external storage with data transfer rates of up to 4.8 Gbps. You can attach a compatible USB printer to the Belkin AC1900 DB F9K1124 device. It has built-in NAS functionality.

USB ports1 x USB 3.0
Print serveryes
File serveryes

Administration

The default IP addresses of the Belkin AC1900 DB F9K1124 device is 192.168.2.1. These address allows you to access the router's console login page.

Default IP192.168.2.1
Default username[blank]
Default password[blank]

The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Belkin AC1900 DB F9K1124, then don’t hesite and signal the problem to us.

Belkin AC1900 DB F9K1124 (F9K1124) pictures

Belkin AC1900 DB F9K1124 / F9K1124 photo Belkin AC1900 DB F9K1124 / F9K1124 photo
Belkin AC1900 DB F9K1124 / F9K1124

If there’s information about the Belkin AC1900 DB F9K1124 that you would like to see on this site, then write to our webmaster@routerchart.com address.

RouterChart.com / Routers / Belkin / Belkin AC1900 DB F9K1124 (2016)
© 2023 RouterChart.com. All rights reserved.
Back to Top