Belkin G54 N150 Wi-Fi F9K1009 v1 router: Pros and Cons

Belkin G54 N150 Wi-Fi F9K1009 v1 (F9K1009) pictures

The specifications below are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Belkin G54 N150 Wi-Fi F9K1009 v1, then don’t hesite and signal the problem to us.

Belkin G54 N150 Wi-Fi F9K1009 v1 (F9K1009) specifications

System

The Realtek RTL8196C CPU, combined with other factors such as RAM capacity and firmware optimization, determines the overall performance and responsiveness of the router. The G54 N150 Wi-Fi F9K1009 v1 has 16 MB of RAM. Some advanced router features and software functionalities require a certain amount of RAM to operate properly. For example, routers with more RAM can support advanced security features, VPN services, or QoS (Quality of Service) prioritization more effectively.

The G54 N150 Wi-Fi F9K1009 v1 has 4 MB of flash memory. A larger flash memory allows for more storage space to accommodate future firmware upgrades. The process of upgrading the firmware on routers has become relatively simple and user-friendly over the years. The Belkin provides easy-to-use interfaces and instructions to guide users through the firmware upgrade process. The Belkin provides the appropriate power supply (12 V / 0.5 A) that matches the voltage requirements of the router. The power supply unit is designed to deliver the correct voltage to the router, ensuring its proper operation.

Network

The G54 N150 Wi-Fi F9K1009 v1 router offers built-in security features to protect your network and connected devices. The majority of networking equipment, including routers, switches, and other network devices, is designed to support IPv4. The G54 N150 Wi-Fi F9K1009 v1 has 4 x 10/100 Mbps LAN and 1 x 10/100 Mbps WAN ports. The LAN ports of G54 N150 Wi-Fi F9K1009 v1 router are numbered and are used to establish wired connections between the router and devices such as computers, gaming consoles, smart TVs, network-attached storage (NAS) devices, and other network-enabled devices.

WAN ports often require specific configuration settings based on the type of internet connection provided by your ISP. If you have a high-speed internet plan with speeds exceeding 100 Mbps, you may experience a bottleneck in wired connections due to the limitation of the Fast Ethernet ports on the G54 N150 Wi-Fi F9K1009 v1 router.

Wireless

This router has 1 x 3 dBi antennas. Many modern routers feature multiple antennas and use Multiple-Input Multiple-Output (MIMO) technology. This technology enables simultaneous transmission and reception of multiple data streams, increasing overall throughput and improving the Wi-Fi performance. The G54 N150 Wi-Fi F9K1009 v1 supports the 2.4 GHz Wi-Fi. It is one of the most common frequency bands used for Wi-Fi networks.

The G54 N150 Wi-Fi F9K1009 v1 is a Wi-Fi 4 (802.11n) router. N routers may have a more limited range compared to newer Wi-Fi standards, making them less suitable for larger homes or offices where Wi-Fi coverage is a concern. The N150 refers to the maximum combined data transfer rate supported by the router across all Wi-Fi bands. The G54 N150 Wi-Fi F9K1009 v1 is capable of a maximum throughput speed of 150 Mbps. The real-world speed of a G54 N150 Wi-Fi F9K1009 v1 router is typically lower than its theoretical maximum speed.

The maximum TX power of G54 N150 Wi-Fi F9K1009 v1 router is 20 dBm. Adjusting the TX power of a router can be useful in situations where you want to optimize the Wi-Fi signal strength and coverage. The G54 N150 Wi-Fi F9K1009 v1 router offers several security protocols: WEP, WPA, WPA2. The WEP (Wired Equivalent Privacy) was the first security protocol for Wi-Fi networks but is now considered weak and easily compromised. It uses a static encryption key and has known vulnerabilities, so it is no longer recommended for securing Wi-Fi networks. The WPA2 (Wi-Fi Protected Access 2) was introduced as an improvement over WEP and provides stronger security. If WPA3 is not available, WPA2-Personal with AES encryption is still considered secure.

Connectivity

The G54 N150 Wi-Fi F9K1009 v1 router doesn't have file-server or print-server functionality.

Administration

The Belkin router setup panel is accessed through a web browser. Connect your computer to the G54 N150 Wi-Fi F9K1009 v1 router via Wi-Fi or Ethernet cable. In the address bar of the web browser, type in the 192.168.2.1 IP address. If you are unable to log in to the setup panel of your Belkin router, performing a reset can be a helpful troubleshooting step. It is highly recommended to change the default password of your G54 N150 Wi-Fi F9K1009 v1 router after the initial setup. If you forget the new password in the future, you may need to perform a factory reset on the router to revert to the default settings.

Belkin G54 N150 Wi-Fi F9K1009 v1 (F9K1009) comparisons

According to our statistics, the Belkin G54 N150 Wi-Fi F9K1009 v1 router was most often compared on our site with the following routers.

Belkin N300 F9K1010 v2 Belkin N750 DB F9K1103 Belkin N300 F9K1002 v5 Belkin AC 1750 DB F9K1115 v2 Belkin AC1900 DB F9K1124 Belkin AC 750 DB F9K1116 v1 Belkin N600 F9K1102 v3 Belkin F5D8235-4

If there’s information about the Belkin G54 N150 Wi-Fi F9K1009 v1 that you would like to see on this site, then write to us.