RouterChart.com
Belkin

Belkin N750 DB F9K1103 (2011) review

300 + 450 Mbps
IEEE 802.11a/b/g/n
N750
Ralink RT3883 @ 500 MHz
64 MB / 8 MB

The Belkin N750 DB F9K1103 (F9K1103) router released in 2011. It is powered by Ralink RT3883 @ 500 MHz chipset, 64 MB RAM and 8 MB flash. The N750 router is compatible with IEEE 802.11a/b/g/n standards, and the maximum speed that you can get with N750 DB F9K1103 is 300 + 450 Mbps.

The Guest network is a useful feature of the N750 DB F9K1103 router that creates a separate network for guests. It has 2 x USB 2.0 port(s).

The N750 DB F9K1103 router has 1 x 10/100/1000 Mbps WAN and 4 x 10/100/1000 Mbps LAN ports.

Table of contents:

Belkin N750 DB F9K1103 (F9K1103) specifications

BrandBelkin
NameN750 DB F9K1103
TypeF9K1103
Rating
Rated 3/5 based on 1062 user votes.
Launch2011

Body

Dimensions226 x 180 x 36 mm
Weight522 g

System

The router's memory (RAM) cannot be expanded. By default, the router's flash memory is used to store the Belkin operating system.

ChipsetRalink RT3883 @ 500 MHz
RAM64 MB
Flash8 MB
OSBelkin
Power supply12 V / 2 A

Network

The latest firmware supports IPv6 protocol that provides an identification and location system for computers on networks and routes traffic across the Internet.

ProtocolsIPv4
IPv6
LAN ports4 x 10/100/1000 Mbps
WAN ports1 x 10/100/1000 Mbps
Mobile networkno
VPN supportno

Wireless

The N750 DB F9K1103 is compatible with 2.4 GHz Wi-Fi networks. 2.4 GHz is the most widely used frequency and in some cases may be overcrowded. The N750 DB F9K1103 supports the 5 GHz band. The 5 GHz band offers better noise immunity, less interference, and more available channels.

Antennas5 x 4 dBi
internal
2.4 GHzyes
5 GHzyes
60 GHzno
StandardsIEEE 802.11a/b/g/n
ClassN750
Speed300 + 450 Mbps
Transmit power20 dBm
SecurityWEP
WPA
WPA2
WPS
Guest networkyes

Connectivity

You can attach a compatible USB printer to the Belkin N750 DB F9K1103 device. It has built-in NAS functionality.

USB ports2 x USB 2.0
Print serveryes
File serveryes

Administration

The default IP addresses of the Belkin N750 DB F9K1103 device is 192.168.2.1. These address allows you to access the router's console login page.

Default IP192.168.2.1
Default username[blank]
Default password[blank]

The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Belkin N750 DB F9K1103, then don’t hesite and signal the problem to us.

Belkin N750 DB F9K1103 (F9K1103) pictures

Belkin N750 DB F9K1103 / F9K1103 photo Belkin N750 DB F9K1103 / F9K1103 photo Belkin N750 DB F9K1103 / F9K1103 photo
Belkin N750 DB F9K1103 / F9K1103

If there’s information about the Belkin N750 DB F9K1103 that you would like to see on this site, then write to our webmaster@routerchart.com address.

RouterChart.com / Routers / Belkin / Belkin N750 DB F9K1103 (2011)
© 2023 RouterChart.com. All rights reserved.
Back to Top