RouterChart.com

Belkin N300 F9K1002 v5 WiFi router: Pros and Cons

300 Mbps
IEEE 802.11b/g/n
Broadcom BCM5357C0
16 MB / 2 MB

The Belkin N300 F9K1002 v5 (F9K1002) router released in 2012. It is powered by Broadcom BCM5357C0 chipset, 16 MB of RAM and 2 MB of flash. The N300 router is compatible with IEEE 802.11b/g/n standards, and the maximum speed that you can get with N300 F9K1002 v5 is 300 Mbps. The router has 1 x 10/100 Mbps WAN and 4 x 10/100 Mbps LAN ports.

This router is a basic, 2.4 GHz wireless router that provides reliable connectivity for small networks. Belkin provides good customer support services through their website, which includes product documentation, FAQs, and downloads.

Belkin N300 F9K1002 v5 (F9K1002) pictures

Belkin N300 F9K1002 v5 / F9K1002 photo
Belkin N300 F9K1002 v5 / F9K1002 photo
Belkin N300 F9K1002 v5 / F9K1002

The specifications below are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Belkin N300 F9K1002 v5, then don’t hesite and signal the problem to us.

Belkin N300 F9K1002 v5 (F9K1002) specifications

BrandBelkin
NameN300 F9K1002 v5
TypeF9K1002
Rating
Rated 3/5 based on 1241 user votes.
Launch2012

System

ChipsetBroadcom BCM5357C0
RAM16 MB
Flash2 MB
OSBelkin
Power supply9 V / 1 A

The Broadcom BCM5357C0 CPU, combined with other factors such as RAM capacity and firmware optimization, determines the overall performance and responsiveness of the router. The N300 F9K1002 v5 has 16 MB of RAM. Some advanced router features and software functionalities require a certain amount of RAM to operate properly. For example, routers with more RAM can support advanced security features, VPN services, or QoS (Quality of Service) prioritization more effectively.

The N300 F9K1002 v5 has 2 MB of flash memory. A larger flash memory allows for more storage space to accommodate future firmware upgrades. The process of upgrading the firmware on routers has become relatively simple and user-friendly over the years. The Belkin provides easy-to-use interfaces and instructions to guide users through the firmware upgrade process. The Belkin provides the appropriate power supply (9 V / 1 A) that matches the voltage requirements of the router. The power supply unit is designed to deliver the correct voltage to the router, ensuring its proper operation.

Network

ProtocolsIPv4
LAN ports4 x 10/100 Mbps
WAN ports1 x 10/100 Mbps
Mobile networkno
VPN supportno

The N300 F9K1002 v5 router offers built-in security features to protect your network and connected devices. The majority of networking equipment, including routers, switches, and other network devices, is designed to support IPv4. The N300 F9K1002 v5 has 4 x 10/100 Mbps LAN and 1 x 10/100 Mbps WAN ports. The LAN ports of N300 F9K1002 v5 router are numbered and are used to establish wired connections between the router and devices such as computers, gaming consoles, smart TVs, network-attached storage (NAS) devices, and other network-enabled devices.

WAN ports often require specific configuration settings based on the type of internet connection provided by your ISP. If you have a high-speed internet plan with speeds exceeding 100 Mbps, you may experience a bottleneck in wired connections due to the limitation of the Fast Ethernet ports on the N300 F9K1002 v5 router.

Wireless

Antennasinternal
2.4 GHzyes
5 GHzno
60 GHzno
StandardsIEEE 802.11b/g/n
ClassN300
Speed300 Mbps
Transmit power20 dBm
SecurityWEP
WPA
WPA2
WPS
Guest networkyes

This router has internal antennas. Many modern routers feature multiple antennas and use Multiple-Input Multiple-Output (MIMO) technology. This technology enables simultaneous transmission and reception of multiple data streams, increasing overall throughput and improving the Wi-Fi performance. This router is 2.4 GHz capable. The 2.4GHz band refers to the portion of the radio spectrum between 2.400 and 2.4835 gigahertz. This frequency range is unlicensed and globally available for various wireless applications, including Wi-Fi.

The N300 F9K1002 v5 is a Wi-Fi 4 (802.11n) router. N routers may have a more limited range compared to newer Wi-Fi standards, making them less suitable for larger homes or offices where Wi-Fi coverage is a concern. The N300 refers to the maximum combined data transfer rate supported by the router across all Wi-Fi bands. The N300 F9K1002 v5 is capable of a maximum throughput speed of 300 Mbps. The real-world speed of a N300 F9K1002 v5 router is typically lower than its theoretical maximum speed.

The maximum TX power of N300 F9K1002 v5 router is 20 dBm. Adjusting the TX power of a router can be useful in situations where you want to optimize the Wi-Fi signal strength and coverage. The N300 F9K1002 v5 router offers several security protocols: WEP, WPA, WPA2, WPS. The WEP (Wired Equivalent Privacy) was the first security protocol for Wi-Fi networks but is now considered weak and easily compromised. It uses a static encryption key and has known vulnerabilities, so it is no longer recommended for securing Wi-Fi networks.

The WPA2 (Wi-Fi Protected Access 2) was introduced as an improvement over WEP and provides stronger security. If WPA3 is not available, WPA2-Personal with AES encryption is still considered secure. The N300 F9K1002 v5 router offers WPS. The WPS (Wi-Fi Protected Setup) provides a simplified and convenient method for connecting devices to a Wi-Fi network. Instead of manually entering the Wi-Fi network name (SSID) and password, users can use the WPS feature to establish a connection with the push of a button or by entering a PIN. Once the guest network is set up on your Belkin N300 F9K1002 v5 router, your guests can connect to it using the specified SSID and password. They will have internet access, while being separated from your private network.

Connectivity

USB portsno
Print serverno
File serverno

The N300 F9K1002 v5 router doesn't have file-server or print-server functionality.

Administration

Default IP192.168.2.1
Default username[blank]
Default password[blank]

The Belkin router setup panel is accessed through a web browser. Connect your computer to the N300 F9K1002 v5 router via Wi-Fi or Ethernet cable. In the address bar of the web browser, type in the 192.168.2.1 IP address. If you are unable to log in to the setup panel of your Belkin router, performing a reset can be a helpful troubleshooting step. It is highly recommended to change the default password of your N300 F9K1002 v5 router after the initial setup. If you forget the new password in the future, you may need to perform a factory reset on the router to revert to the default settings.

Belkin N300 F9K1002 v5 (F9K1002) comparisons

According to our statistics, the Belkin N300 F9K1002 v5 router was most often compared on our site with the following routers.

Belkin AC1900 DB F9K1124 (F9K1124) Belkin AC1900 DB F9K1124 Belkin AC 1750 DB F9K1115 v2 (F9K1115) Belkin AC 1750 DB F9K1115 v2 Belkin N750 DB F9K1103 (F9K1103) Belkin N750 DB F9K1103 Belkin AC 750 DB F9K1116 v1 (F9K1116) Belkin AC 750 DB F9K1116 v1 Belkin AC 1200 DB F9K1113 v2 (F9K1113) Belkin AC 1200 DB F9K1113 v2 Belkin F5D8235-4 (F5D8235-4) Belkin F5D8235-4 Belkin N300 F9K1010 v2 (F9K1010V2) Belkin N300 F9K1010 v2 Belkin N450 DB F9K1105 (F9K1105) Belkin N450 DB F9K1105

If there’s information about the Belkin N300 F9K1002 v5 that you would like to see on this site, then write to us.

RouterChart.com / Routers / Belkin / Belkin N300 F9K1002 v5 (2012)