JCG JHR-N805R WiFi router: Pros and Cons
The JCG JHR-N805R (JHR-N805R) router released in 2012. It is powered by Ralink RT3050 chipset, 16 MB of RAM and 4 MB of flash. The N150 router is compatible with IEEE 802.11b/g/n standards, and the maximum speed that you can get with JHR-N805R is 150 Mbps. The router has 1 x 10/100 Mbps WAN and 4 x 10/100 Mbps LAN ports.
Operating on the 2.4 GHz frequency band, the JHR-N805R router offers decent wireless coverage and compatibility with a wide range of devices. JCG places a strong emphasis on network security.
JCG JHR-N805R (JHR-N805R) pictures
The specifications below are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the JCG JHR-N805R, then don’t hesite and signal the problem to us.
JCG JHR-N805R (JHR-N805R) specifications
|Power supply||12 V / 1 A|
The JCG JHR-N805R router is equipped with Ralink RT3050 processor. The router's memory (16 MB) cannot be expanded. When choosing a router, it is important to consider both the flash memory and RAM specifications. The JHR-N805R has 4 MB of flash. A larger flash memory allows for more space to store configuration backups. It enables you to save multiple versions of your router's configuration settings, which can be useful for restoring previous configurations or reverting changes if needed.
Within the JHR-N805R router's interface, look for a section related to firmware or system settings. The exact location and wording may vary depending on the router's make and model. The JCG JHR-N805R router comes with 12 V / 1 A PSU. This unit is responsible for providing electrical power to the router, and if it becomes faulty, it can be replaced with a new, compatible one.
|LAN ports||4 x 10/100 Mbps|
|WAN ports||1 x 10/100 Mbps|
The JHR-N805R router supports multiple networking standards to ensure compatibility with various devices and systems. The IPv4 is the fourth iteration of the Internet Protocol (IP) and is the most widely used version of IP on the internet today. The JCG JHR-N805R has 4 x 10/100 Mbps LAN and 1 x 10/100 Mbps WAN ports. LAN or Ethernet ports (RJ-45) are used to connect devices to the local area network (LAN).
WAN ports are the entry point to your local network, making them a potential target for unauthorized access or attacks. It's important to secure your WAN connection by using strong passwords, enabling encryption protocols, and keeping the router's firmware up to date to mitigate security risks. The WAN port on the JHR-N805R router is a Fast Ethernet port, not a Gigabit Ethernet. The Fast Ethernet ports are capable of supporting speeds up to 100 Mbps, which is still suitable for most internet connections.
|Antennas||2 x 4 dBi|
|Transmit power||20 dBm|
This router has 2 x 4 dBi, fixed antennas. Antennas play a significant role in Wi-Fi performance and coverage. They are essential components of wireless routers that transmit and receive radio signals to establish wireless connections with devices. The JHR-N805R is compatible with 2.4 GHz Wi-Fi networks. 2.4 GHz is the most widely used frequency and in some cases may be overcrowded. The JHR-N805R is a Wi-Fi 4 (802.11n) router. Wi-Fi 4 improved the range and coverage compared to previous Wi-Fi standards. The use of MIMO technology and other enhancements help to mitigate signal degradation and provide better coverage in larger homes or office environments. This allows devices to maintain a stable connection even when located farther away from the Wi-Fi router.
The N150 is a performance indicator that represents the router's theoretical maximum speed. The theoretical maximum speed (150 Mbps) represents the highest data transfer rate that the router is capable of achieving under ideal conditions. The TX power (20 dBm) of a router refers to the transmission power or signal strength at which the router broadcasts its Wi-Fi signal. It determines the range and coverage area of the wireless network.
The JHR-N805R router offers several security protocols: WEP, WPA, WPA2, WPS. The WEP (Wired Equivalent Privacy) was the first security protocol for Wi-Fi networks but is now considered weak and easily compromised. It uses a static encryption key and has known vulnerabilities, so it is no longer recommended for securing Wi-Fi networks. The WPA2 (Wi-Fi Protected Access 2) was introduced as an improvement over WEP and provides stronger security. If WPA3 is not available, WPA2-Personal with AES encryption is still considered secure. The JHR-N805R router offers WPS. The WPS (Wi-Fi Protected Setup) provides a simplified and convenient method for connecting devices to a Wi-Fi network. Instead of manually entering the Wi-Fi network name (SSID) and password, users can use the WPS feature to establish a connection with the push of a button or by entering a PIN.
The JHR-N805R router doesn't have file-server or print-server functionality.
The default IP addresses of the JCG JHR-N805R device is 192.168.1.1. These address allows you to access the router's console login page. Regularly changing the password is a good security practice to protect your network and devices from unauthorized access. It is also recommended to use strong, unique passwords for other devices and online accounts connected to your network for enhanced security. By changing the default password, you improve the security of your router and reduce the risk of unauthorized individuals gaining control over your network. It helps prevent unauthorized access to your router's settings, network configurations, and sensitive information.
JCG JHR-N805R (JHR-N805R) comparisons
According to our statistics, the JCG JHR-N805R router was most often compared on our site with the following routers.
If there’s information about the JCG JHR-N805R that you would like to see on this site, then write to us.