JCG JHR-N825R (2012) review
The JCG JHR-N825R (JHR-N825R) router released in 2012. It is powered by Ralink RT3052 @ 384 MHz chipset, 32 MB RAM and 4 MB flash. The N300 router is compatible with IEEE 802.11b/g/n standards, and the maximum speed that you can get with JHR-N825R is 300 Mbps.
The JHR-N825R router has 1 x 10/100 Mbps WAN and 4 x 10/100 Mbps LAN ports.
Table of contents:
JCG JHR-N825R (JHR-N825R) specifications
|Dimensions||170 x 140 x 25 mm|
The router's memory (RAM) cannot be expanded. By default, the router's flash memory is used to store the JCG operating system.
|Chipset||Ralink RT3052 @ 384 MHz|
|Power supply||12 V / 1 A|
|LAN ports||4 x 10/100 Mbps|
|WAN ports||1 x 10/100 Mbps|
The JHR-N825R is compatible with 2.4 GHz Wi-Fi networks. 2.4 GHz is the most widely used frequency and in some cases may be overcrowded.
|Antennas||2 x 4 dBi|
|Transmit power||19 dBm|
The default IP addresses of the JCG JHR-N825R device is 192.168.1.1. These address allows you to access the router's console login page.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the JCG JHR-N825R, then don’t hesite and signal the problem to us.
JCG JHR-N825R (JHR-N825R) pictures
If there’s information about the JCG JHR-N825R that you would like to see on this site, then write to our firstname.lastname@example.org address.