Netgear N900 WNDR4500 v3 WiFi router: Pros and Cons

Netgear N900 WNDR4500 v3 (WNDR4500V3) pictures

The specifications below are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Netgear N900 WNDR4500 v3, then don’t hesite and signal the problem to us.

Netgear N900 WNDR4500 v3 (WNDR4500V3) specifications

Body

The dimensions and design of a router can impact its cooling capabilities. Routers with larger dimensions may have more space for internal cooling mechanisms, such as larger fans or heat sinks, which can help dissipate heat more effectively. The weight of router is not typically a critical factor for most home or office setups.

System

The Netgear N900 WNDR4500 v3 router is equipped with Qualcomm Atheros QCA9563 @ 750 MHz processor. The router's memory (128 MB) cannot be expanded. When choosing a router, it is important to consider both the flash memory and RAM specifications. The N900 WNDR4500 v3 has 128 MB of flash. A larger flash memory allows for more space to store configuration backups. It enables you to save multiple versions of your router's configuration settings, which can be useful for restoring previous configurations or reverting changes if needed.

Within the N900 WNDR4500 v3 router's interface, look for a section related to firmware or system settings. The exact location and wording may vary depending on the router's make and model. The Netgear N900 WNDR4500 v3 router comes with 12 V / 1.5 A PSU. This unit is responsible for providing electrical power to the router, and if it becomes faulty, it can be replaced with a new, compatible one.

Network

The N900 WNDR4500 v3 router supports multiple networking standards to ensure compatibility with various devices and systems. The IPv4 is the fourth iteration of the Internet Protocol (IP) and is the most widely used version of IP on the internet today. The latest firmware supports IPv6 protocol that provides an identification and location system for computers on networks and routes traffic across the Internet.

The Netgear N900 WNDR4500 v3 has 4 x 10/100/1000 Mbps LAN and 1 x 10/100/1000 Mbps WAN ports. LAN or Ethernet ports (RJ-45) are used to connect devices to the local area network (LAN). Gigabit Ethernet ports of the N900 WNDR4500 v3 router allow for faster communication between devices within your local network. WAN ports are the entry point to your local network, making them a potential target for unauthorized access or attacks. It's important to secure your WAN connection by using strong passwords, enabling encryption protocols, and keeping the router's firmware up to date to mitigate security risks. The N900 WNDR4500 v3 router supports Gigabit WAN. Having a Gigabit WAN port is beneficial when your internet service plan supports high-speed connectivity, as it ensures that your router's WAN connection can handle the maximum speed provided by your ISP.

Wireless

This router has 2 x 3.8 dBi, internal antennas. Antennas play a significant role in Wi-Fi performance and coverage. They are essential components of wireless routers that transmit and receive radio signals to establish wireless connections with devices. The N900 WNDR4500 v3 supports the 2.4 GHz Wi-Fi. It is one of the most common frequency bands used for Wi-Fi networks. The 2.4 GHz band is heavily utilized by various devices like cordless phones, Bluetooth devices, and microwaves, leading to higher interference levels. The 5 GHz band is less congested, resulting in reduced interference and a clearer wireless signal. The N900 WNDR4500 v3 router is 5 GHz capable.

The N900 WNDR4500 v3 is a Wi-Fi 4 (802.11n) router. Wi-Fi 4 improved the range and coverage compared to previous Wi-Fi standards. The use of MIMO technology and other enhancements help to mitigate signal degradation and provide better coverage in larger homes or office environments. This allows devices to maintain a stable connection even when located farther away from the Wi-Fi router. The N900 is a performance indicator that represents the router's theoretical maximum speed.

The theoretical maximum speed (450 + 450 Mbps) represents the highest data transfer rate that the router is capable of achieving under ideal conditions. The TX power (20 dBm) of a router refers to the transmission power or signal strength at which the router broadcasts its Wi-Fi signal. It determines the range and coverage area of the wireless network. The N900 WNDR4500 v3 router offers several security protocols: WEP, WPA, WPA2, WPS.

The WEP (Wired Equivalent Privacy) was the first security protocol for Wi-Fi networks but is now considered weak and easily compromised. It uses a static encryption key and has known vulnerabilities, so it is no longer recommended for securing Wi-Fi networks. The WPA2 (Wi-Fi Protected Access 2) was introduced as an improvement over WEP and provides stronger security. If WPA3 is not available, WPA2-Personal with AES encryption is still considered secure.

The N900 WNDR4500 v3 router offers WPS. The WPS (Wi-Fi Protected Setup) provides a simplified and convenient method for connecting devices to a Wi-Fi network. Instead of manually entering the Wi-Fi network name (SSID) and password, users can use the WPS feature to establish a connection with the push of a button or by entering a PIN. A guest network on the N900 WNDR4500 v3 router is a separate network that provides internet access to guests or visitors without giving them access to your main or primary network. It allows you to create a dedicated network segment for guests, keeping their devices isolated from your private network, thereby enhancing security and privacy.

Connectivity

USB ports can offer additional functionality depending on the router's capabilities. The USB 2 port has a maximum theoretical data transfer rate of 480 megabits per second (Mbps), which is equivalent to 60 megabytes per second (MB/s). You can attach a compatible USB printer to the Netgear N900 WNDR4500 v3 device. USB print servers allow you to connect a USB printer to your network, making it accessible to multiple devices. This eliminates the need for each device to have a direct USB connection to the printer. It has built-in NAS functionality. You can connect external storage devices such as USB flash drives or USB hard drives to your router. This allows you to share files, documents, photos, and media across devices on your network. It can be convenient for accessing and sharing files without the need for separate file servers or cloud storage.

Administration

The default IP addresses of the Netgear N900 WNDR4500 v3 device is 192.168.1.1. These address allows you to access the router's console login page. Regularly changing the password is a good security practice to protect your network and devices from unauthorized access. It is also recommended to use strong, unique passwords for other devices and online accounts connected to your network for enhanced security. By changing the default password, you improve the security of your router and reduce the risk of unauthorized individuals gaining control over your network. It helps prevent unauthorized access to your router's settings, network configurations, and sensitive information.

Netgear N900 WNDR4500 v3 (WNDR4500V3) comparisons

According to our statistics, the Netgear N900 WNDR4500 v3 router was most often compared on our site with the following routers.

Netgear Nighthawk AX1800 WiFi 6 Netgear AC1750 WiFi Router Netgear Nighthawk X4S AC2600 Netgear N300 WNR2000 v5 Netgear Nighthawk AX8 Dual-Band WiFi 6 Netgear N300 WNR3500L v2 Netgear N600 WNDR3400 v3 Netgear Nighthawk X8 AC5300

If there’s information about the Netgear N900 WNDR4500 v3 that you would like to see on this site, then write to us.