Netgear Nighthawk AX6 Dual-Band AX5400 (2020) review
The Netgear Nighthawk AX6 Dual-Band AX5400 (RAX50S) router released in 2020. It is powered by Broadcom BCM6750 @ 1.5 GHz chipset, 512 MB RAM and 256 MB flash. The AX5400 router is compatible with IEEE 802.11a/b/g/n/ac/ax standards, and the maximum speed that you can get with Nighthawk AX6 Dual-Band AX5400 is 574 + 4804 Mbps.
The Guest network is a useful feature of the Nighthawk AX6 Dual-Band AX5400 router that creates a separate network for guests. It has 1 x USB 3.0 port(s).
The Nighthawk AX6 Dual-Band AX5400 router has 1 x 10/100/1000 Mbps WAN and 4 x 10/100/1000 Mbps LAN ports.
Table of contents:
- Netgear Nighthawk AX6 Dual-Band AX5400 specifications
- Netgear Nighthawk AX6 Dual-Band AX5400 pictures
Netgear Nighthawk AX6 Dual-Band AX5400 (RAX50S) specifications
- Nighthawk AX6 Dual-Band AX5400
- 295.8 x 206 x 57.2 mm
- 566 g
The router's memory (RAM) cannot be expanded. By default, the router's flash memory is used to store the Netgear operating system.
- Broadcom BCM6750 @ 1.5 GHz
- 512 MB
- 256 MB
- Power supply
- 12 V / 2.5 A
The latest firmware supports IPv6 protocol that provides an identification and location system for computers on networks and routes traffic across the Internet. The Nighthawk AX6 Dual-Band AX5400 comes with OpenVPN support. OpenVPN is a full-featured SSL VPN solution which implements OSI layer 2 or 3 secure network extension using the industry standard SSL/TLS protocol.
- LAN ports
- 4 x 10/100/1000 Mbps
- WAN ports
- 1 x 10/100/1000 Mbps
- Mobile network
- VPN support
The Nighthawk AX6 Dual-Band AX5400 is compatible with 2.4 GHz Wi-Fi networks. 2.4 GHz is the most widely used frequency and in some cases may be overcrowded. The Nighthawk AX6 Dual-Band AX5400 supports the 5 GHz band. The 5 GHz band offers better noise immunity, less interference, and more available channels.
- 4 x 3 dBi
- 2.4 GHz
- 5 GHz
- 6 GHz
- 60 GHz
- IEEE 802.11a/b/g/n/ac/ax
- 574 + 4804 Mbps
- Transmit power
- 24 dBm
- Guest network
The USB 3.0 ports provide a fast interface for external storage with data transfer rates of up to 4.8 Gbps. You can attach a compatible USB printer to the Netgear Nighthawk AX6 Dual-Band AX5400 device. It has built-in NAS functionality.
- USB ports
- 1 x USB 3.0
- Print server
- File server
The default IP addresses of the Netgear Nighthawk AX6 Dual-Band AX5400 device is 192.168.1.1. These address allows you to access the router's console login page.
- Default IP
- Default username
- Default password
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Netgear Nighthawk AX6 Dual-Band AX5400, then don’t hesite and signal the problem to us.
Netgear Nighthawk AX6 Dual-Band AX5400 (RAX50S) pictures
If there’s information about the Netgear Nighthawk AX6 Dual-Band AX5400 that you would like to see on this site, then write to our firstname.lastname@example.org address.