Netgear Nighthawk AX4 4-Stream WiFi 6 router: Pros and Cons

Netgear Nighthawk AX4 4-Stream WiFi 6 (RAX35) pictures

The specifications below are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Netgear Nighthawk AX4 4-Stream WiFi 6, then don’t hesite and signal the problem to us.

Netgear Nighthawk AX4 4-Stream WiFi 6 (RAX35) specifications

Body

The dimensions and design of a router can impact its cooling capabilities. Routers with larger dimensions may have more space for internal cooling mechanisms, such as larger fans or heat sinks, which can help dissipate heat more effectively. The weight of router is not typically a critical factor for most home or office setups.

System

The Netgear Nighthawk AX4 4-Stream WiFi 6 router is equipped with Broadcom BCM6750 @ 1.5 GHz processor. The router's memory (512 MB) cannot be expanded. When choosing a router, it is important to consider both the flash memory and RAM specifications. The Nighthawk AX4 4-Stream WiFi 6 has 256 MB of flash. A larger flash memory allows for more space to store configuration backups. It enables you to save multiple versions of your router's configuration settings, which can be useful for restoring previous configurations or reverting changes if needed.

Within the Nighthawk AX4 4-Stream WiFi 6 router's interface, look for a section related to firmware or system settings. The exact location and wording may vary depending on the router's make and model. The Netgear Nighthawk AX4 4-Stream WiFi 6 router comes with 12 V / 1.5 A PSU. This unit is responsible for providing electrical power to the router, and if it becomes faulty, it can be replaced with a new, compatible one.

Network

The Nighthawk AX4 4-Stream WiFi 6 router supports multiple networking standards to ensure compatibility with various devices and systems. The IPv4 is the fourth iteration of the Internet Protocol (IP) and is the most widely used version of IP on the internet today. The latest firmware supports IPv6 protocol that provides an identification and location system for computers on networks and routes traffic across the Internet.

The Netgear Nighthawk AX4 4-Stream WiFi 6 has 4 x 10/100/1000 Mbps LAN and 1 x 10/100/1000 Mbps WAN ports. LAN or Ethernet ports (RJ-45) are used to connect devices to the local area network (LAN). Gigabit Ethernet ports of the Nighthawk AX4 4-Stream WiFi 6 router allow for faster communication between devices within your local network. WAN ports are the entry point to your local network, making them a potential target for unauthorized access or attacks. It's important to secure your WAN connection by using strong passwords, enabling encryption protocols, and keeping the router's firmware up to date to mitigate security risks.

The Nighthawk AX4 4-Stream WiFi 6 router supports Gigabit WAN. Having a Gigabit WAN port is beneficial when your internet service plan supports high-speed connectivity, as it ensures that your router's WAN connection can handle the maximum speed provided by your ISP. OpenVPN is a popular choice for VPN deployments due to its strong security, flexibility, and broad compatibility. It is commonly used by individuals, businesses, and organizations to establish secure remote access connections and protect sensitive data transmitted over public networks.

Wireless

This router has 2 x 3 dBi, fixed antennas. Antennas play a significant role in Wi-Fi performance and coverage. They are essential components of wireless routers that transmit and receive radio signals to establish wireless connections with devices. The Nighthawk AX4 4-Stream WiFi 6 is compatible with 2.4 GHz Wi-Fi networks. 2.4 GHz is the most widely used frequency and in some cases may be overcrowded.

The 2.4 GHz band is heavily utilized by various devices like cordless phones, Bluetooth devices, and microwaves, leading to higher interference levels. The 5 GHz band is less congested, resulting in reduced interference and a clearer wireless signal. The Nighthawk AX4 4-Stream WiFi 6 router is 5 GHz capable. This router is a Wi-Fi 6 router. 802.11ax is the sixth-generation Wi-Fi standard, commonly referred to as Wi-Fi 6. It builds upon the previous Wi-Fi 5 (802.11ac) standard and brings significant improvements in speed, capacity, and overall performance.

The AX3000 is a performance indicator that represents the router's theoretical maximum speed. The theoretical maximum speed (600 + 2400 Mbps) represents the highest data transfer rate that the router is capable of achieving under ideal conditions. The TX power (25 dBm) of a router refers to the transmission power or signal strength at which the router broadcasts its Wi-Fi signal. It determines the range and coverage area of the wireless network.

The Nighthawk AX4 4-Stream WiFi 6 router offers several security protocols: WEP, WPA, WPA2, WPA3, WPS. The WEP (Wired Equivalent Privacy) was the first security protocol for Wi-Fi networks but is now considered weak and easily compromised. It uses a static encryption key and has known vulnerabilities, so it is no longer recommended for securing Wi-Fi networks. The WPA2 (Wi-Fi Protected Access 2) was introduced as an improvement over WEP and provides stronger security. If WPA3 is not available, WPA2-Personal with AES encryption is still considered secure.

The WPA3 (Wi-Fi Protected Access 3) is the latest Wi-Fi security protocol designed to address vulnerabilities and strengthen security for wireless networks. It improves encryption, introduces stronger authentication protocols, and protects against brute-force attacks. The Nighthawk AX4 4-Stream WiFi 6 router offers WPS. The WPS (Wi-Fi Protected Setup) provides a simplified and convenient method for connecting devices to a Wi-Fi network. Instead of manually entering the Wi-Fi network name (SSID) and password, users can use the WPS feature to establish a connection with the push of a button or by entering a PIN. A guest network on the Nighthawk AX4 4-Stream WiFi 6 router is a separate network that provides internet access to guests or visitors without giving them access to your main or primary network. It allows you to create a dedicated network segment for guests, keeping their devices isolated from your private network, thereby enhancing security and privacy.

Connectivity

The Nighthawk AX4 4-Stream WiFi 6 router doesn't have file-server or print-server functionality.

Administration

The default IP addresses of the Netgear Nighthawk AX4 4-Stream WiFi 6 device is 192.168.1.1. These address allows you to access the router's console login page. Regularly changing the password is a good security practice to protect your network and devices from unauthorized access. It is also recommended to use strong, unique passwords for other devices and online accounts connected to your network for enhanced security. By changing the default password, you improve the security of your router and reduce the risk of unauthorized individuals gaining control over your network. It helps prevent unauthorized access to your router's settings, network configurations, and sensitive information.

Netgear Nighthawk AX4 4-Stream WiFi 6 (RAX35) comparisons

According to our statistics, the Netgear Nighthawk AX4 4-Stream WiFi 6 router was most often compared on our site with the following routers.

Netgear Smart WiFi AC1600 Netgear Nighthawk AC1900 Netgear Nighthawk AX1800 WiFi 6 Netgear Dual-Band AC1600 WiFi 5 Netgear N450 WNR2500 Netgear AX1800 Dual-Band WiFi 6 Netgear Nighthawk AX8 8-Stream Tri-Band WiFi 6 Netgear N300 WNR2200

If there’s information about the Netgear Nighthawk AX4 4-Stream WiFi 6 that you would like to see on this site, then write to us.