Netis WF2533 WiFi router: Pros and Cons

Netis WF2533 (WF2533) pictures

The specifications below are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Netis WF2533, then don’t hesite and signal the problem to us.

Netis WF2533 (WF2533) specifications

System

The Netis WF2533 router is equipped with Broadcom BCM5357C0 @ 300 MHz processor. The WF2533 comes with 32 MB of RAM. The amount of RAM in a router can impact its performance and capacity to handle concurrent operations and traffic. Higher RAM capacity allows for better multitasking, larger routing tables, and improved overall performance. The 8 MB flash memory in the router serves as the storage medium for the router's firmware. It is a non-volatile memory that retains its data even when power is removed from the device.

The Netis often releases firmware updates to enhance the router's functionality, improve security, fix bugs, and add new features. Firmware updates can provide performance improvements, compatibility with new devices or protocols, and address vulnerabilities. The Netis WF2533 router comes with 12 V / 1 A PSU. This unit is responsible for providing electrical power to the router, and if it becomes faulty, it can be replaced with a new, compatible one.

Network

Like many modern routers, the WF2533 supports many network standards too. The IPv4 is the fourth iteration of the Internet Protocol (IP) and is the most widely used version of IP on the internet today. The Netis WF2533 has 4 x 10/100 Mbps LAN and 1 x 10/100 Mbps WAN ports. LAN or Ethernet ports (RJ-45) are used to connect devices to the local area network (LAN). The WAN port on a router stands for "Wide Area Network" port. It is used to connect the router to the external network, typically provided by an internet service provider (ISP). The WAN port on the WF2533 router is a Fast Ethernet port, not a Gigabit Ethernet. The Fast Ethernet ports are capable of supporting speeds up to 100 Mbps, which is still suitable for most internet connections.

Wireless

This router has 3 x 5 dBi, RP-SMA antennas. Antennas play a significant role in Wi-Fi performance and coverage. They are essential components of wireless routers that transmit and receive radio signals to establish wireless connections with devices. The WF2533 is compatible with 2.4 GHz Wi-Fi networks. 2.4 GHz is the most widely used frequency and in some cases may be overcrowded. The WF2533 is a Wi-Fi 4 (802.11n) router. Wi-Fi 4 improved the range and coverage compared to previous Wi-Fi standards. The use of MIMO technology and other enhancements help to mitigate signal degradation and provide better coverage in larger homes or office environments. This allows devices to maintain a stable connection even when located farther away from the Wi-Fi router.

The N300 refers to the maximum combined data transfer rate supported by the router across all Wi-Fi bands. The WF2533 is capable of a maximum throughput speed of 300 Mbps. The real-world speed of a WF2533 router is typically lower than its theoretical maximum speed. The TX power (27 dBm) of a router refers to the transmission power or signal strength at which the router broadcasts its Wi-Fi signal. It determines the range and coverage area of the wireless network.

The WF2533 router offers several security protocols: WEP, WPA, WPA2, WPS. The WEP (Wired Equivalent Privacy) was the first security protocol for Wi-Fi networks but is now considered weak and easily compromised. It uses a static encryption key and has known vulnerabilities, so it is no longer recommended for securing Wi-Fi networks. The WPA2 (Wi-Fi Protected Access 2) was introduced as an improvement over WEP and provides stronger security. If WPA3 is not available, WPA2-Personal with AES encryption is still considered secure. The WF2533 router offers WPS. The WPS (Wi-Fi Protected Setup) provides a simplified and convenient method for connecting devices to a Wi-Fi network. Instead of manually entering the Wi-Fi network name (SSID) and password, users can use the WPS feature to establish a connection with the push of a button or by entering a PIN.

Connectivity

The WF2533 router doesn't have file-server or print-server functionality.

Administration

The default IP addresses of the Netis WF2533 device is 192.168.1.1. These address allows you to access the router's console login page. If you are unable to log in to the setup panel of your Netis router, performing a reset can be a helpful troubleshooting step. It is highly recommended to change the default password of your WF2533 router after the initial setup. If you forget the new password in the future, you may need to perform a factory reset on the router to revert to the default settings.

Netis WF2533 (WF2533) comparisons

According to our statistics, the Netis WF2533 router was most often compared on our site with the following routers.

Netis WF2780 Netis WF2411I Netis WF2411 Netis WF2420 Netis WF2411D Netis WF2414 Netis WF2681 Netis WF2880

If there’s information about the Netis WF2533 that you would like to see on this site, then write to us.