TP-Link Archer C2 (2014) review
The TP-Link Archer C2 (C2) router released in 2014. It is powered by MediaTek MT7620A @ 580 MHz chipset, 64 MB RAM and 8 MB flash. The AC900 router is compatible with IEEE 802.11a/b/g/n/ac standards, and the maximum speed that you can get with Archer C2 is 450 + 433 Mbps.
The Guest network is a useful feature of the Archer C2 router that creates a separate network for guests. It has 1 x USB 2.0 port(s).
The Archer C2 router has 1 x 10/100/1000 Mbps WAN and 4 x 10/100/1000 Mbps LAN ports.
Table of contents:
TP-Link Archer C2 (C2) specifications
- Brand
- TP-Link
- Name
- Archer C2
- Type
- C2
- Rating
- Launch
- 2014
Body
- Dimensions
- 230 x 144 x 35 mm
System
The router's memory (RAM) cannot be expanded. By default, the router's flash memory is used to store the TP-Link operating system.
- Chipset
- MediaTek MT7620A @ 580 MHz
- RAM
- 64 MB
- Flash
- 8 MB
- OS
- TP-Link
- Power supply
- 12 V / 1 A
Network
The latest firmware supports IPv6 protocol that provides an identification and location system for computers on networks and routes traffic across the Internet.
- Protocols
- IPv4
IPv6 - LAN ports
- 4 x 10/100/1000 Mbps
- WAN ports
- 1 x 10/100/1000 Mbps
- Mobile network
- no
- VPN support
- no
Wireless
The Archer C2 is compatible with 2.4 GHz Wi-Fi networks. 2.4 GHz is the most widely used frequency and in some cases may be overcrowded. The Archer C2 supports the 5 GHz band. The 5 GHz band offers better noise immunity, less interference, and more available channels.
- Antennas
- 3 x 5 dBi
RP-SMA - 2.4 GHz
- yes
- 5 GHz
- yes
- 60 GHz
- no
- Standards
- IEEE 802.11a/b/g/n/ac
- Class
- AC900
- Speed
- 450 + 433 Mbps
- Transmit power
- 23 dBm
- Security
- WEP
WPA
WPA2
WPS - Guest network
- yes
Connectivity
You can attach a compatible USB printer to the TP-Link Archer C2 device. It has built-in NAS functionality.
- USB ports
- 1 x USB 2.0
- Print server
- yes
- File server
- yes
Administration
The default IP addresses of the TP-Link Archer C2 device is 192.168.0.1. These address allows you to access the router's console login page.
- Default IP
- 192.168.0.1
- Default username
- admin
- Default password
- admin
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the TP-Link Archer C2, then don’t hesite and signal the problem to us.
TP-Link Archer C2 (C2) pictures
If there’s information about the TP-Link Archer C2 that you would like to see on this site, then write to our webmaster@routerchart.com address.