TP-Link Archer C58 (2016) review
The TP-Link Archer C58 (C58) router released in 2016. It is powered by Qualcomm Atheros QCA9561 @ 750 MHz chipset, 64 MB RAM and 8 MB flash. The AC1300 router is compatible with IEEE 802.11a/b/g/n/ac standards, and the maximum speed that you can get with Archer C58 is 450 + 867 Mbps.
The Guest network is a useful feature of the Archer C58 router that creates a separate network for guests.
The Archer C58 router has 1 x 10/100 Mbps WAN and 4 x 10/100 Mbps LAN ports.
Table of contents:
TP-Link Archer C58 (C58) specifications
|Dimensions||225 x 148 x 33 mm|
The router's memory (RAM) cannot be expanded. By default, the router's flash memory is used to store the TP-Link operating system.
|Chipset||Qualcomm Atheros QCA9561 @ 750 MHz|
|Power supply||12 V / 1 A|
The latest firmware supports IPv6 protocol that provides an identification and location system for computers on networks and routes traffic across the Internet.
|LAN ports||4 x 10/100 Mbps|
|WAN ports||1 x 10/100 Mbps|
The Archer C58 is compatible with 2.4 GHz Wi-Fi networks. 2.4 GHz is the most widely used frequency and in some cases may be overcrowded. The Archer C58 supports the 5 GHz band. The 5 GHz band offers better noise immunity, less interference, and more available channels.
|Antennas||3 x 5 dBi|
|Speed||450 + 867 Mbps|
|Transmit power||17 dBm|
The default IP addresses of the TP-Link Archer C58 device is 192.168.0.1. These address allows you to access the router's console login page.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the TP-Link Archer C58, then don’t hesite and signal the problem to us.
TP-Link Archer C58 (C58) pictures
If there’s information about the TP-Link Archer C58 that you would like to see on this site, then write to our email@example.com address.