RouterChart.com
TP-Link

TP-Link TL-WR1043ND v2 (2013) review

300 Mbps
IEEE 802.11b/g/n
N300
Qualcomm Atheros QCA9558 @ 720 MHz
64 MB / 8 MB

The TP-Link TL-WR1043ND v2 (TL-WR1043NDV2) router released in 2013. It is powered by Qualcomm Atheros QCA9558 @ 720 MHz chipset, 64 MB RAM and 8 MB flash. The N300 router is compatible with IEEE 802.11b/g/n standards, and the maximum speed that you can get with TL-WR1043ND v2 is 300 Mbps.

It has 1 x USB 2.0 port(s).

The TL-WR1043ND v2 router has 1 x 10/100/1000 Mbps WAN and 4 x 10/100/1000 Mbps LAN ports.

Table of contents:

TP-Link TL-WR1043ND v2 (TL-WR1043NDV2) specifications

BrandTP-Link
NameTL-WR1043ND v2
TypeTL-WR1043NDV2
Rating
Rated 4/5 based on 1082 user votes.
Launch2013

Body

Dimensions225 x 30 x 141 mm
Weight830 g

System

The router's memory (RAM) cannot be expanded. By default, the router's flash memory is used to store the TP-Link operating system.

ChipsetQualcomm Atheros QCA9558 @ 720 MHz
RAM64 MB
Flash8 MB
OSTP-Link
Alternative OSOpenWRT
DD-WRT
Gargoyle
Power supply12 V / 1.5 A

Network

The latest firmware supports IPv6 protocol that provides an identification and location system for computers on networks and routes traffic across the Internet.

ProtocolsIPv4
IPv6
LAN ports4 x 10/100/1000 Mbps
WAN ports1 x 10/100/1000 Mbps
Mobile networkno
VPN supportPPTP
L2TP

Wireless

The TL-WR1043ND v2 is compatible with 2.4 GHz Wi-Fi networks. 2.4 GHz is the most widely used frequency and in some cases may be overcrowded.

Antennas3 x 5 dBi
RP-SMA
2.4 GHzyes
5 GHzno
60 GHzno
StandardsIEEE 802.11b/g/n
ClassN300
Speed300 Mbps
Transmit power25 dBm
SecurityWEP
WPA
WPA2
Guest networkno

Connectivity

You can attach a compatible USB printer to the TP-Link TL-WR1043ND v2 device. It has built-in NAS functionality.

USB ports1 x USB 2.0
Print serveryes
File serveryes

Administration

The default IP addresses of the TP-Link TL-WR1043ND v2 device is 192.168.1.1. These address allows you to access the router's console login page.

Default IP192.168.1.1
Default usernameadmin
Default passwordadmin

The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the TP-Link TL-WR1043ND v2, then don’t hesite and signal the problem to us.

TP-Link TL-WR1043ND v2 (TL-WR1043NDV2) pictures

TP-Link TL-WR1043ND v2 / TL-WR1043NDV2 photo TP-Link TL-WR1043ND v2 / TL-WR1043NDV2 photo TP-Link TL-WR1043ND v2 / TL-WR1043NDV2 photo
TP-Link TL-WR1043ND v2 / TL-WR1043NDV2

If there’s information about the TP-Link TL-WR1043ND v2 that you would like to see on this site, then write to our webmaster@routerchart.com address.

RouterChart.com / Routers / TP-Link / TP-Link TL-WR1043ND v2 (2013)
© 2023 RouterChart.com. All rights reserved.
Back to Top