TP-Link Archer AX10 WiFi router: Pros and Cons

TP-Link Archer AX10 (AX10) pictures

The specifications below are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the TP-Link Archer AX10, then don’t hesite and signal the problem to us.

TP-Link Archer AX10 (AX10) specifications

Body

If you plan to move or travel frequently and need to take your router with you, the dimensions become important for portability. Smaller and more compact routers are generally easier to transport, while larger routers with external antennas or multiple ports may be bulkier and less convenient to carry. The weight of router is not typically a critical factor for most home or office setups.

System

The Broadcom BCM6755 @ 1.5 GHz CPU provides processing power to handle various tasks and services within the Archer AX10 router. The router's memory (256 MB) cannot be expanded. When choosing a router, it is important to consider both the flash memory and RAM specifications. The Archer AX10 has 16 MB of flash. A larger flash memory allows for more space to store configuration backups. It enables you to save multiple versions of your router's configuration settings, which can be useful for restoring previous configurations or reverting changes if needed.

Within the Archer AX10 router's interface, look for a section related to firmware or system settings. The exact location and wording may vary depending on the router's make and model. The TP-Link packages the Archer AX10 router with 12 V / 1 A PSU. A good PSU is an essential component of a computer or electronic device that converts electrical power from an outlet into the appropriate voltage and current required to power the internal components of the device.

Network

The Archer AX10 router supports multiple networking standards to ensure compatibility with various devices and systems. The IPv4 uses 32-bit addresses, represented as four sets of numbers separated by periods (e.g. 192.168.0.1). The Archer AX10 router also supports IPv6 protocol, allowing you to utilize the latest version of the Internet Protocol. The LAN ports are physical connectors on a Archer AX10 router that allow you to connect devices to your local network using Ethernet cables.

Gigabit Ethernet ports of the Archer AX10 router allow for faster communication between devices within your local network. WAN ports are the entry point to your local network, making them a potential target for unauthorized access or attacks. It's important to secure your WAN connection by using strong passwords, enabling encryption protocols, and keeping the router's firmware up to date to mitigate security risks.

The Archer AX10 router supports Gigabit WAN. Having a Gigabit WAN port is beneficial when your internet service plan supports high-speed connectivity, as it ensures that your router's WAN connection can handle the maximum speed provided by your ISP. OpenVPN is a popular choice for VPN deployments due to its strong security, flexibility, and broad compatibility. It is commonly used by individuals, businesses, and organizations to establish secure remote access connections and protect sensitive data transmitted over public networks. PPTP has been criticized for its security weaknesses. It has known vulnerabilities, including issues with the encryption algorithm and the potential for password cracking attacks.

Wireless

The 4 x 4 dBi, fixed antennas of Archer AX10 influence the quality and stability of the Wi-Fi signal. A properly positioned and well-designed antenna can minimize interference and signal degradation, leading to a more reliable and stable connection. The Archer AX10 is compatible with 2.4 GHz Wi-Fi. Many IoT (Internet of Things) devices, smart home devices, and older Wi-Fi-enabled devices primarily operate on the 2.4 GHz band.

This router is 5 GHz capable. The 5GHz band provides faster data transfer speeds compared to the 2.4GHz band. This is primarily because the 5GHz band has more available channels and less interference from other devices like microwaves or cordless phones. This AX Wi-Fi router provides significantly faster data transfer rates compared to older Wi-Fi standards. They can support higher speeds and increased capacity, allowing for smoother streaming, faster downloads, and improved overall network performance.

The AX1500 is a performance indicator that represents the router's theoretical maximum speed. The theoretical maximum speed (300 + 1201 Mbps) represents the highest data transfer rate that the router is capable of achieving under ideal conditions. The TX power of Archer AX10 can be adjusted by the user or set automatically by the router firmware. Higher TX power values indicate stronger signal transmission, which can result in a larger coverage area.

The Archer AX10 router offers several security protocols: WEP, WPA, WPA2, WPS. The WEP (Wired Equivalent Privacy) was the first security protocol for Wi-Fi networks but is now considered weak and easily compromised. It uses a static encryption key and has known vulnerabilities, so it is no longer recommended for securing Wi-Fi networks. The WPA2 (Wi-Fi Protected Access 2) was introduced as an improvement over WEP and provides stronger security. If WPA3 is not available, WPA2-Personal with AES encryption is still considered secure.

The Archer AX10 router offers WPS. The WPS (Wi-Fi Protected Setup) provides a simplified and convenient method for connecting devices to a Wi-Fi network. Instead of manually entering the Wi-Fi network name (SSID) and password, users can use the WPS feature to establish a connection with the push of a button or by entering a PIN. The TP-Link Archer AX10 router is capable of creating a guest network. Guests connected to the guest network usually have limited access to network settings and configurations. They are typically restricted from accessing devices connected to the primary network, such as printers, network-attached storage (NAS), or other shared resources.

Connectivity

The Archer AX10 router doesn't have file-server or print-server functionality.

Administration

The default IP address of this router is 192.168.0.1. Explore the router's configuration interface to access more advanced settings such as port forwarding, DHCP settings, parental controls, firewall settings, and QoS (Quality of Service) settings. Regularly changing the password is a good security practice to protect your network and devices from unauthorized access. It is also recommended to use strong, unique passwords for other devices and online accounts connected to your network for enhanced security. By changing the default password, you improve the security of your router and reduce the risk of unauthorized individuals gaining control over your network. It helps prevent unauthorized access to your router's settings, network configurations, and sensitive information.

TP-Link Archer AX10 (AX10) comparisons

According to our statistics, the TP-Link Archer AX10 router was most often compared on our site with the following routers.

TP-Link Archer GX90 TP-Link Archer C20i TP-Link Archer D9 TP-Link Archer VR900 TP-Link TL-WR1042ND TP-Link Archer AX1500 TP-Link Archer AX6000 TP-Link Archer C5400

If there’s information about the TP-Link Archer AX10 that you would like to see on this site, then write to us.